EL5412 Datasheet, PDF (1/8 Pages) Intersil Corporation – 40MHz Rail-to-Rail Input-Output Op Amp

®
Data Sheet
December 22, 2004
EL5412
FN7394.1
40MHz Rail-to-Rail Input-Output Op Amp
The EL5412 is a low power, high voltage rail-to-rail input-
output amplifier containing four amplifiers in one package.
Operating on supplies ranging from 5V to 15V, while
consuming only 2.5mA per amplifier, the EL5412 has a
bandwidth of 40MHz (-3dB). It also provides common mode
input ability beyond the supply rails, as well as rail-to-rail
output capability. This enables this amplifier to offer
maximum dynamic range at any supply voltage.
The EL5412 also features fast slewing and settling times, as
well as a high output drive capability of 65mA (sink and
source), continuous current, and ±190mA short-circuit
current. These features make this amplifier ideal for high
speed filtering and signal conditioning and V_COM driving
applications. Other applications include battery-powered and
portable devices and anywhere low power consumption is
important.
The EL5412 is available in both the 14-pin TSSOP and 14-
pin HTSSOP packages and features a standard operational
amplifier pinout. They are specified for operation over the full
-40°C to +85°C temperature range.
Ordering Information
PART
NUMBER
PACKAGE
TAPE &
REEL
PKG. DWG. #
EL5412IR
14-Pin TSSOP
-
MDP0044
EL5412IR-T7
14-Pin TSSOP
7”
MDP0044
EL5412IR-T13 14-Pin TSSOP
13”
MDP0044
EL5412IRZ
14-Pin TSSOP
-
(See Note)
(Pb-free)
MDP0044
EL5412IRZ-T7 14-Pin TSSOP
7”
(See Note)
(Pb-free)
MDP0044
EL5412IRZ-T13 14-Pin TSSOP
13”
(See Note)
(Pb-free)
MDP0044
EL5412IRE
14-Pin HTSSOP
-
MDP0048
EL5412IRE-T7 14-Pin HTSSOP
7”
MDP0048
EL5412IRE-T13 14-Pin HTSSOP
13”
MDP0048
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with
both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020C.
Features
• 40MHz -3dB bandwidth
• Supply voltage = 4.5V to 16.5V
• Low supply current (per amplifier) = 2.5mA
• High slew rate = 55V/µs
• Unity-gain stable
• Beyond the rails input capability
• Rail-to-rail output swing
• ±190mA output short current
• Pb-Free Available (RoHS Compliant)
Applications
• TFT-LCD panels
• V_COM amplifiers
• Drivers for A-to-D converters
• Data acquisition
• Video processing
• Audio processing
• Active filters
• Test equipment
• Battery-powered applications
• Portable equipment
Pinout
EL5412
(14-PIN TSSOP, 14-PIN HTSSOP)
TOP VIEW
VOUTA 1
VINA- 2
-
VINA+ 3 +
VS+ ⁴
VINB+ 5
+
VINB- 6 -
VOUTB 7
14 VOUTD
13 VIND-
-
+ 12 VIND+
11 _VS-
10 VINC+
+
- 9 VINC-
8 VOUTC
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003, 2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.