EL5326 Datasheet, PDF (1/12 Pages) Intersil Corporation – 10- and 12-Channel TFT-LCD Reference Voltage Generators

®
Data Sheet
EL5226, EL5326
May 9, 2005
FN7118.3
10- and 12-Channel TFT-LCD Reference
Voltage Generators
The EL5226 and EL5326 are designed to produce the
reference voltages required in TFT-LCD applications. Each
output is programmed to the required voltage with 10 bits of
resolution. Reference pins determine the high and low
voltages of the output range, which are capable of swinging
to either supply rail. Programming of each output is
performed using the I²C serial interface.
A number of the EL5226 and EL5326 can be stacked for
applications requiring more than 12 outputs. The reference
inputs can be tied to the rails, enabling each part to output
the full voltage range, or alternatively, they can be connected
to external resistors to split the output range and enable finer
resolutions of the outputs.
The EL5226 has 10 outputs and the EL5326 has 12 outputs
and both are available in a 28-pin TSSOP package. They
are specified for operation over the full -40°C to +85°C
temperature range.
Features
• 10- to 12-channel reference outputs
• Accuracy of ±1%
• Supply voltage of 5V to 16.5V
• Digital supply 3.3V to 5V
• Low supply current of 10mA
• Rail-to-rail capability
• Pb-Free available (RoHS compliant)
Applications
• TFT-LCD drive circuits
• Reference voltage generators
Ordering Information
PART
NUMBER
PACKAGE TAPE & REEL PKG. DWG. #
EL5226IR
28-Pin TSSOP
-
MDP0044
EL5226IR-T7 28-Pin TSSOP
7”
MDP0044
EL5226IR-T13 28-Pin TSSOP
13”
MDP0044
EL5226IRZ
28-Pin TSSOP
-
(See Note)
(Pb-free)
MDP0044
EL5226IRZ-T7 28-Pin TSSOP
7”
(See Note)
(Pb-free)
MDP0044
EL5226IRZ-T13 28-Pin TSSOP
13”
(See Note)
(Pb-free)
MDP0044
EL5326IR
28-Pin TSSOP
-
MDP0044
EL5326IR-T7 28-Pin TSSOP
7”
MDP0044
EL5326IR-T13 28-Pin TSSOP
13”
MDP0044
EL5326IRZ
28-Pin TSSOP
-
(See Note)
(Pb-free)
MDP0044
EL5326IRZ-T7 28-Pin TSSOP
7”
(See Note)
(Pb-free)
MDP0044
EL5326IRZ-T13 28-Pin TSSOP
13”
(See Note)
(Pb-free)
MDP0044
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with
both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003, 2004, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.