EL5293 Datasheet, PDF (1/14 Pages) Intersil Corporation – Dual 300MHz Current Feedback Amplifier with Enable

®
NOT ^{RECOMSMEEENEDLE52D6F0O, ERLN52E6W3 DESIGNS}
EL5293, EL5293A
Data Sheet
September 30, 2005
FN7193.2
Dual 300MHz Current Feedback Amplifier
with Enable
The EL5293 and EL5293A represent dual current feedback
amplifiers with a bandwidth of 300MHz. This makes these
amplifiers ideal for today’s high speed video and monitor
applications.
With a supply current of just 4mA per amplifier and the ability
to run from a single supply voltage from 5V to 10V, these
amplifiers are also ideal for hand held, portable or battery
powered equipment.
The EL5293A also incorporates an enable and disable
function to reduce the supply current to 100µA typical per
amplifier. Allowing the CE pin to float or applying a low logic
level will enable the amplifier.
The EL5293 is offered in the industry-standard 8-pin SO
package and the space-saving 8-pin MSOP package. The
EL5293A is available in a 10-pin MSOP package and all
operate over the industrial temperature range of -40°C to
+85°C.
Ordering Information
PART
TAPE & PKG.
PART NUMBER MARKING PACKAGE REEL DWG. #
EL5293CS
5293CS
8-Pin SO
- MDP0027
EL5293CS-T7 5293CS
8-Pin SO
7” MDP0027
EL5293CS-T13 5293CS
8-Pin SO
13” MDP0027
EL5293CSZ
(See Note)
5293CSZ
8-Pin SO
(Pb-free)
- MDP0027
EL5293CSZ-T7 5293CSZ
(See Note)
8-Pin SO
(Pb-free)
7” MDP0027
EL5293CSZ-T13 5293CSZ
(See Note)
8-Pin SO
(Pb-free)
13” MDP0027
EL5293CY
V
8-Pin MSOP
- MDP0043
EL5293CY-T7 V
8-Pin MSOP
7” MDP0043
EL5293CY-T13 V
8-Pin MSOP 13” MDP0043
EL5293ACY
Y
10-Pin MSOP
- MDP0043
EL5293ACY-T7 Y
10-Pin MSOP 7” MDP0043
EL5293ACY-T13 Y
10-Pin MSOP 13” MDP0043
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Features
• 300MHz -3dB bandwidth
• 4mA supply current (per amplifier)
• Single and dual supply operation, from 5V to 10V
• Fast enable/disable (EL5293A only)
• Single (EL5193) and triple (EL5393) available
• High speed, 1GHz product available (EL5191)
• High speed, 6mA, 600MHz product available (EL5192,
EL5292, and EL5392)
• Pb-free plus anneal available (RoHS compliant)
Applications
• Battery-powered equipment
• Hand-held, portable devices
• Video amplifiers
• Cable drivers
• RGB amplifiers
• Test equipment
• Instrumentation
• Current to voltage converters
Pinouts
EL5293
(8-PIN SO, MSOP)
TOP VIEW
OUTA 1
INA- 2
-
+
INA+ 3
VS- 4
8 VS+
7 OUTB
6 INB-
-
+
5 INB+
EL5293A
(10-PIN MSOP)
TOP VIEW
INA+ 1
CEA 2
VS- 3
CEB 4
INB+ 5
10 INA-
-
9 OUTA
+
8 VS+
+
7 OUTB
-
6 INB-
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.