EL5292 Datasheet, PDF (1/14 Pages) Intersil Corporation – Dual 600MHz Current Feedback Amplifier with Enable

®
NOT ^{RECOMSMEEENEDLE52D6F0,OERLN52E6W3 DESIGNS}
EL5292, EL5292A
Data Sheet
January 22, 2004
FN7192
Dual 600MHz Current Feedback Amplifier
with Enable
The EL5292 and EL5292A represent
dual current feedback amplifiers with a
very high bandwidth of 600MHz. This
makes these amplifiers ideal for today’s high speed video
and monitor applications.
With a supply current of just 6mA per amplifier and the ability
to run from a single supply voltage from 5V to 10V, these
amplifiers are also ideal for hand held, portable or battery
powered equipment.
The EL5292A also incorporates an enable and disable
function to reduce the supply current to 100µA typical per
amplifier. Allowing the CE pin to float or applying a low logic
level will enable the amplifier.
The EL5292 is offered in the industry-standard 8-pin SO
package and the space-saving 8-pin MSOP package. The
EL5292A is available in a 10-pin MSOP package and all
operate over the industrial temperature range of -40°C to
+85°C.
Pinouts
EL5292
(8-PIN SO, MSOP)
TOP VIEW
OUTA 1
INA- 2
-
+
INA+ 3
VS- 4
8 VS+
7 OUTB
6 INB-
-
+
5 INB+
EL5292A
(10-PIN MSOP)
TOP VIEW
INA+ 1
CEA 2
VS- 3
CEB 4
INB+ 5
10 INA-
-
9 OUTA
+
8 VS+
+
7 OUTB
-
6 INB-
Features
• 600MHz -3dB bandwidth
• 6mA supply current (per amplifier)
• Single and dual supply operation, from 5V to 10V
• Fast enable/disable (EL5292A only)
• Single (EL5192) and triple (EL5392) available
• High speed, 1GHz product available (EL5191)
• Low power, 4mA, 300MHz product available (EL5193,
EL5293, and EL5393)
Applications
• Video amplifiers
• Cable drivers
• RGB amplifiers
• Test equipment
• Instrumentation
• Current to voltage converters
Ordering Information
PART NUMBER
EL5292CS
EL5292CS-T7
EL5292CS-T13
EL5292CY
EL5292CY-T7
EL5292CY-T13
EL5292ACY
EL5292ACY-T7
EL5292ACY-T13
PACKAGE
8-Pin SO
8-Pin SO
8-Pin SO
8-Pin MSOP
8-Pin MSOP
8-Pin MSOP
10-Pin MSOP
10-Pin MSOP
10-Pin MSOP
TAPE &
REEL
-
7”
13”
-
7”
13”
-
7”
13”
PKG. NO.
MDP0027
MDP0027
MDP0027
MDP0043
MDP0043
MDP0043
MDP0043
MDP0043
MDP0043
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.