EL5250 Datasheet, PDF (1/18 Pages) Intersil Corporation – 200MHz Amplifiers

EL5150, EL5151, EL5250, EL5251, EL5451
®
Data Sheet
February 14, 2005
FN7384.4
200MHz Amplifiers
The EL5150, EL5151, EL5250, EL5251, and EL5451 are
200MHz bandwidth -3dB voltage mode feedback amplifiers
with DC accuracy of 0.01%, 1mV offsets and 10kV/V open
loop gains. These amplifiers are ideally suited for
applications ranging from precision measurement
instrumentation to high speed video and monitor
applications. Capable of operating with as little as 1.4mA of
current from a single supply ranging from 5V to 12V, dual
supplies ranging from ±2.5V to ±5.0V, these amplifiers are
also well suited for handheld, portable and battery-powered
equipment.
Single amplifiers are offered in SOT-23 packages and duals
in a 10-pin MSOP package for applications where board
space is critical. Quad amplifiers are available in a 14-pin SO
package. Additionally, singles and duals are available in the
industry-standard 8-pin SO package. All parts operate over
the industrial temperature range of -40°C to +85°C.
Features
• 200MHz -3dB bandwidth
• 67V/µs slew rate
• Very high open loop gains 50kV/V
• Low supply current = 1.4mA
• Single supplies from 5V to 12V
• Dual supplies from ±2.5V to ±5V
• Fast disable on the EL5150 and EL5250
• Low cost
• Pb-free available (RoHS compliant)
Applications
• Imaging
• Instrumentation
• Video
• Communications devices
Ordering Information
PART NUMBER
EL5150IS
PACKAGE
8-Pin SO
EL5150IS-T7
EL5150IS-T13
8-Pin SO
8-Pin SO
TAPE &
REEL
-
PKG. DWG. #
MDP0027
7”
MDP0027
13”
MDP0027
PART NUMBER PACKAGE
TAPE &
REEL
PKG. DWG. #
EL5151IWZ-T7A 5-Pin SOT-23 7” (250 pcs)
(See Note)
(Pb-Free)
MDP0038
EL5250IY
10-Pin MSOP
-
MDP0043
EL5250IY-T7
10-Pin MSOP
7”
MDP0043
EL5150ISZ
(See Note)
EL5150ISZ-T7
(See Note)
EL5150ISZ-T13
(See Note)
EL5150IW-T7
EL5150IW-T7A
EL5150IWZ-T7
(See Note)
EL5150IWZ-T7A
(See Note)
8-Pin SO
(Pb-Free)
8-Pin SO
(Pb-Free)
8-Pin SO
(Pb-Free)
6-Pin SOT-23
6-Pin SOT-23
6-Pin SOT-23
(Pb-Free)
6-Pin SOT-23
(Pb-Free)
-
7”
13”
7” (3K pcs)
7” (250 pcs)
7” (3K pcs)
7” (250 pcs)
MDP0027
MDP0027
MDP0027
MDP0038
MDP0038
MDP0038
MDP0038
EL5250IY-T13
10-Pin MSOP
13”
EL5251IS
8-Pin SO
-
EL5251IS-T7
8-Pin SO
7”
EL5251IS-T13
8-Pin SO
13”
EL5251IY
8-Pin MSOP
-
EL5251IY-T7
8-Pin MSOP
7”
EL5251IY-T13
8-Pin MSOP
13”
MDP0043
MDP0027
MDP0027
MDP0027
MDP0043
MDP0043
MDP0043
EL5151IW-T7
5-Pin SOT-23 7” (3K pcs) MDP0038
EL5451IS
14-Pin SO
-
MDP0027
EL5151IW-T7A 5-Pin SOT-23 7” (250 pcs) MDP0038
EL5451IS-T7
14-Pin SO
7”
MDP0027
EL5151IWZ-T7
(See Note)
5-Pin SOT-23 7” (3K pcs)
(Pb-Free)
MDP0038
EL5451IS-T13
14-Pin SO
13”
MDP0027
NOTE: Intersil Pb-free products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination
finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at
Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020C.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2004-2005. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.