|
EL5211A_07 Datasheet, PDF (1/12 Pages) Intersil Corporation – 60MHz Rail-to-Rail Input-Output Op Amp | |||
|
®
Data Sheet
April 24, 2007
EL5211A
FN6143.1
60MHz Rail-to-Rail Input-Output Op Amp
The EL5211A is a low power, high voltage, rail-to-rail input-
output amplifier containing two amplifiers. Operating on
supplies ranging from 5V to 15V, while consuming only
2.5mA per amplifier, the EL5211A has a bandwidth of
60MHz (-3dB) and provides common-mode input ability
beyond the supply rails, as well as rail-to-rail output
capability. This enables the EL5211A to offer maximum
dynamic range at any supply voltage.
The EL5211A also features fast slewing and settling times,
as well as a high output drive capability of 65mA (sink and
source). These features make the EL5211A ideal for high
speed filtering and signal conditioning application. Other
applications include battery-powered, portable devices and
anywhere low power consumption is important.
The EL5211A is available in the 8 Ld HMSOP package,
features a standard operational amplifier pinout, and is
specified for operation over a temperature range of -40°C to
+85°C.
Ordering Information
PART NUMBER PART TAPE & PACKAGE PKG.
(Note)
MARKING REEL (Pb-free) DWG. #
EL5211AIYEZ
BBLAA
- 8 Ld HMSOP MDP0050
(3.0mm)
EL5211AIYEZ-T7 BBLAA
7â 8 Ld HMSOP MDP0050
(3.0mm)
EL5211AIYEZ-T13 BBLAA
13â 8 Ld HMSOP MDP0050
(3.0mm)
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Features
⢠60MHz (-3dB) bandwidth
⢠Supply voltage = 4.5V to 16.5V
⢠Low supply current (per amplifier) = 2.5mA
⢠High slew rate = 75V/µs
⢠Unity-gain stable
⢠Beyond the rails input capability
⢠Rail-to-rail output swing
⢠±110mA output short current
⢠Pb-free plus anneal available (RoHS compliant)
Applications
⢠TFT-LCD panels
⢠VCOM amplifiers
⢠Drivers for A/D converters
⢠Data acquisition
⢠Video processing
⢠Audio processing
⢠Active filters
⢠Test equipment
⢠Battery-powered applications
⢠Portable equipment
Pinout
EL5211A
(8 LD HMSOP)
TOP VIEW
VOUTA 1
VINA- 2 -
+
VINA+ 3
VS- 4
8 VS+
7 VOUTB
- 6 VINB-
+
5 VINB+
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2005, 2007. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.
|
▷ |