EL5197 Datasheet, PDF (1/13 Pages) Intersil Corporation – Single 200MHz Fixed Gain Amplifier with Enable

®
NOT ^{RECOMSMEEENEDLE51D0F6,OERLN51E0W8 DESIGNS}
Data Sheet
EL5197, EL5197A
August 3, 2005
FN7184.1
Single 200MHz Fixed Gain Amplifier with
Enable
The EL5197 and EL5197A are fixed gain amplifiers with a
bandwidth of 200MHz, making these amplifiers ideal for
today’s high speed video and monitor applications. These
amplifiers feature internal gain setting resistors and can be
configured in a gain of +1, -1 or +2. The same bandwidth is
seen in both gain-of-1 and gain-of-2 applications.
With a supply current of just 4mA and the ability to run from
a single supply voltage from 5V to 10V, these amplifiers are
also ideal for hand held, portable or battery powered
equipment.
The EL5197A also incorporates an enable and disable
function to reduce the supply current to 100µA typical per
amplifier. Allowing the CE pin to float or applying a low logic
level will enable the amplifier.
The EL5197 is offered in the 5-pin SOT-23 package and the
EL5197A is available in the 6-pin SOT-23 as well as the
industry-standard 8-pin SO packages. Both operate over the
industrial temperature range of -40°C to +85°C.
Ordering Information
PART NUMBER PACKAGE
TAPE &
REEL PKG. DWG. #
EL5197CW-T7
5-Pin SOT-23* 7” (3K pcs) MDP0038
EL5197CW-T7A 5-Pin SOT-23* 7” (250 pcs) MDP0038
EL5197ACW-T7 6-Pin SOT-23*
7”
MDP0038
EL5197ACS
8-Pin SO
-
MDP0027
EL5197ACS-T7
8-Pin SO
7”
MDP0027
EL5197ACS-T13
8-Pin SO
13”
MDP0027
EL5197ACSZ
(See Note)
8-Pin SO
(Pb-free)
-
MDP0027
EL5197ACSZ-T7
(See Note)
8-Pin SO
(Pb-free)
7”
MDP0027
EL5197ACSZ-T13
(See Note)
8-Pin SO
(Pb-free)
13”
MDP0027
*EL5197CW & EL5197ACW symbol is .Sxxx where xxx represents
date code
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Features
• Gain selectable (+1, -1, +2)
• 200MHz -3dB BW (A_V = 1, 2)
• 4mA supply current
• Fast enable/disable (EL5197A only)
• Single and dual supply operation, from 5V to 10V or ±2.5V
to ±5V
• Available in SOT-23 packages
• Triple (EL5397) available
• 400MHz, 9mA products available (EL5197 & EL5396)
• Pb-Free plus anneal available (RoHS compliant)
Applications
• Battery powered equipment
• Hand held, portable devices
• Video amplifiers
• Cable drivers
• RGB amplifiers
• Test equipment
• Instrumentation
• Current to voltage converters
Pinouts
EL5197A
(8-PIN SO)
TOP VIEW
NC 1
IN- 2
IN+ 3
VS- 4
8 CE
-
7 VS+
+
6 OUT
5 NC
EL5197A
(6-PIN SOT-23)
TOP VIEW
OUT 1
VS- 2
+-
IN+ 3
6 VS+
5 CE
4 IN-
EL5197
(5-PIN SOT-23)
TOP VIEW
OUT 1
VS- 2
+-
IN+ 3
5 VS+
4 IN-
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2004, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.