EL5175 Datasheet, PDF (1/15 Pages) Intersil Corporation – 550MHz Differential Line Receivers

®
Data Sheet
EL5175, EL5375
August 25, 2010
FN7306.7
550MHz Differential Line Receivers
The EL5175 and EL5375 are single and triple high bandwidth
amplifiers designed to extract the difference signal from noisy
environments. They are primarily targeted for applications such
as receiving signals from twisted-pair lines or any application
where common mode noise injection is likely to occur.
The EL5175 and EL5375 are stable for a gain of one and
requires two external resistors to set the voltage gain for
each channel.
The output common mode level is set by the reference pin
(V_REF), which has a -3dB bandwidth of over 450MHz.
Generally, this pin is grounded but it can be tied to any
voltage reference.
The output can deliver a maximum of ±60mA and is short
circuit protected to withstand a temporary overload condition.
The EL5175 is available in the 8 Ld SOIC and 8 Ld MSOP
packages and the EL5375 in the 24 Ld QSOP package. All
are specified for operation over the full -40°C to +85°C
temperature range.
Pinouts
EL5175
(8 LD SOIC, MSOP)
TOP VIEW
FB 1
8 OUT
IN+ 2
+-
IN- 3
7 VS-
6 VS+
REF 4
5 EN
EL5375
(24 LD QSOP)
TOP VIEW
REF1 ₁
24 ^NC
INP1 ₂
+
-
INN1 ₃
23 ^FB1
22 ^OUT1
NC ₄
21 ^NC
REF2 5
20 VSP
INP2 6
+
-
INN2 7
19 VSN
18 NC
NC 8
17 FB2
REF3 ⁹
16 _OUT2
INP3 ¹⁰
+
-
INN3 ¹¹
NC ¹²
15 _EN
14 _FB3
13 _OUT3
Features
• Differential input range ±2.3V
• 550MHz 3dB bandwidth
• 900V/µs slew rate
• 60mA maximum output current
• Single 5V or dual ±5V supplies
• Low power, 9.6mA per channel
• Pb-free available (RoHS compliant)
Applications
• Twisted-pair receivers
• Differential line receivers
• VGA over twisted-pair
• Differential to single-ended amplification
• Reception of analog signals in a noisy environment
Ordering Information
PART
NUMBER
PART
MARKING
PACKAGE
PKG.
DWG. #
EL5175IS*
5175IS
8 Ld SOIC (150 mil) MDP0027
EL5175ISZ*
(Note)
5175ISZ
8 Ld SOIC (Pb-free) MDP0027
(150 mil)
EL5175IY*
5
8 Ld MSOP (3.0mm) MDP0043
EL5175IYZ*
(Note)
BAAAB
8 Ld MSOP (Pb-free) MDP0043
(3.0mm)
EL5375IU*
EL5375IU 24 Ld QSOP (150 mil) MDP0040
EL5375IUZ*
(Note)
EL5375IUZ 24 Ld QSOP (Pb-free) MDP0040
(150 mil)
*Add “-T7” or “-T13” suffix for tape and reel. Please refer to TB347
for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations). Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2004, 2005, 2007, 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.