EL5174 Datasheet, PDF (1/15 Pages) Intersil Corporation – 550MHz Differential Twisted-Pair Drivers

®
Data Sheet
EL5174, EL5374
August 3, 2010
FN7313.7
550MHz Differential Twisted-Pair Drivers
The EL5174 and EL5374 are single and triple high
bandwidth amplifiers with an output in differential form. They
are primarily targeted for applications such as driving
twisted-pair lines in component video applications. The
inputs can be in either single-ended or differential form but
the outputs are always in differential form.
On the EL5174 and EL5374, two feedback inputs provide
the user with the ability to set the gain of each device (stable
at minimum gain of one). For a fixed gain of two, please see
the EL5173, EL5373 data sheet (FN7312).
The output common mode level for each channel is set by
the associated REF pin, which has a -3dB bandwidth of over
110MHz. Generally, these pins are grounded but can be tied
to any voltage reference.
All outputs are short circuit protected to withstand temporary
overload condition.
The EL5174 is available in a 8 Ld SOIC package and the
EL5374 is available in a 28 Ld QSOP package. All are specified
for operation over the full -40°C to +85°C temperature range.
Ordering Information
PART
NUMBER
PART
MARKING
TEMP.
RANGE
(°C)
PACKAGE
PKG.
DWG. #
EL5174IS* 5174IS
-40 to +85 8 Ld SOIC MDP0027
EL5174ISZ* 5174ISZ
(Note)
-40 to +85 8 Ld SOIC MDP0027
(Pb-Free)
EL5374IU* EL5374IU -40 to +85 28 Ld QSOP M28.15
EL5374IUZ* EL5374IUZ -40 to +85 28 Ld QSOP M28.15
(Note)
(Pb-Free)
*Add “-T7” or “-T13” suffix for tape and reel. Please refer to TB347
for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations). Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
Features
• Fully differential inputs, outputs, and feedback
• Differential input range ±2.3V
• 550MHz 3dB bandwidth
• 1100V/µs slew rate
• Low distortion at 5MHz
• Single 5V or dual ±5V supplies
• 60mA maximum output current
• Low power - 12.5mA per channel
• Pb-free available (RoHS compliant)
Applications
• Twisted-pair driver
• Differential line driver
• VGA over twisted-pair
• ADSL/HDSL driver
• Single-ended to differential amplification
• Transmission of analog signals in a noisy environment
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003-2005, 2007, 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.