EL5173 Datasheet, PDF (1/14 Pages) Intersil Corporation – 450MHz Differential Twisted-Pair Drivers

®
Data Sheet
EL5173, EL5373
September 14, 2010
FN7312.8
450MHz Differential Twisted-Pair Drivers
The EL5173 and EL5373 are single and triple high bandwidth
amplifiers with a fixed gain of 2. They are primarily targeted for
applications such as driving twisted-pair lines in component
video applications. The inputs can be in either single-ended or
differential form but the outputs are always in differential form.
The output common mode level for each channel is set by
the associated REF pin, which has a -3dB bandwidth of over
190MHz. Generally, these pins are grounded but can be tied
to any voltage reference.
All outputs are short circuit protected to withstand temporary
overload condition.
The EL5173 and EL5373 are specified for operation over the
full -40°C to +85°C temperature range.
Pinouts
EL5173
(8 LD SOIC, MSOP)
TOP VIEW
EL5373
(24 LD QSOP)
TOP VIEW
1 ^IN+
2 ^EN
3 ^IN-
4 ^REF
OUT 8
VS- 7
VS+ 6
OUTB 5
EN 1
+
INP1 2
-
INN1 3
REF1 4
NC 5
INP2 6
INN2 7
+
REF2 8
-
NC 9
INP3 10
+
INN3 11
-
REF3 12
24 OUT1
23 OUT1B
22 NC
21 VSP
20 VSN
19 NC
18 OUT2
17 OUT2B
16 NC
15 OUT3
14 OUT3B
13 NC
Features
• Fully differential inputs and outputs
• Differential input range ±2.3V
• 450MHz 3dB bandwidth at fixed gain of 2
• 900V/µs slew rate (EL5173)
• 1100V/µs slew rate (EL5373)
• Single 5V or dual ±5V supplies
• 40mA maximum output current
• Low power - 12mA per channel
• Pb-free available (RoHS compliant)
Applications
• Twisted-pair drivers
• Differential line drivers
• VGA over twisted-pairs
• ADSL/HDSL drivers
• Single-ended to differential amplification
• Transmission of analog signals in a noisy environment
Ordering Information
PART
NUMBER
PART
MARKING
PACKAGE
PKG.
DWG. #
EL5173IS*
5173IS
8 Ld SOIC
M8.15E
EL5173ISZ* (Note) 5173ISZ
8 Ld SOIC
(Pb-free)
M8.15E
EL5173IY*
i
8 Ld MSOP
M8.118A
EL5173IYZ* (Note) BAAYA
8 Ld MSOP
(Pb-free)
M8.118A
EL5373IU
EL5373IU
24 Ld QSOP MDP0040
EL5373IUZ* (Note) EL5373IUZ
24 Ld QSOP
(Pb-free)
MDP0040
*Add “-T7” or “-T13” suffix for tape and reel. Please refer to TB347
for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations). Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005-2008, 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.