EL5171_06 Datasheet, PDF (1/14 Pages) Intersil Corporation – 250MHz Differential Twisted-Pair Drivers

®
Data Sheet
EL5171, EL5371
October 30, 2006
FN7307.6
250MHz Differential Twisted-Pair Drivers
The EL5171 and EL5371 are single and triple bandwidth
amplifiers with an output in differential form. They are
primarily targeted for applications such as driving twisted-
pair lines in component video applications. The input signal
is single-ended and the outputs are always differential.
On the EL5171 and EL5371, two feedback inputs provide
the user with the ability to set the gain of each device (stable
at minimum gain of one). For a fixed gain of two, please see
EL5170 and EL5370.
The output common mode level for each channel is set by
the associated V_REF pin, which have a -3dB bandwidth of
over 50MHz. Generally, these pins are grounded but can be
tied to any voltage reference.
All outputs are short circuit protected to withstand temporary
overload condition.
The EL5171 and EL5371 are specified for operation over the
full -40°C to +85°C temperature range.
Ordering Information
PART
NUMBER
PART TAPE &
PKG.
MARKING REEL PACKAGE DWG. #
EL5171IS
5171IS
- 8 Ld SO
MDP0027
EL5171IS-T7 5171IS
7” 8 Ld SO
MDP0027
EL5171IS-T13 5171IS
13” 8 Ld SO
MDP0027
EL5171ISZ
(See Note)
5171ISZ
- 8 Ld SO
(Pb-free)
MDP0027
EL5171ISZ-T7 5171ISZ
(See Note)
7” 8 Ld SO
(Pb-free)
MDP0027
EL5171ISZ-T13 5171ISZ
(See Note)
13” 8 Ld SO
(Pb-free)
MDP0027
EL5371IU
5371IU
- 28 Ld QSOP MDP0040
EL5371IU-T7 5371IU
7” 28 Ld QSOP MDP0040
EL5371IU-T13 5371IU
13” 28 Ld QSOP MDP0040
EL5371IUZ
(See Note)
5371IUZ
-
28 Ld QSOP MDP0040
(Pb-free)
EL5371IUZ-T7 5371IUZ
(See Note)
7” 28 Ld QSOP MDP0040
(Pb-free)
EL5371IUZ-T13 5371IUZ
(See Note)
13” 28 Ld QSOP MDP0040
(Pb-free)
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Features
• Fully differential outputs and feedback
• Input range ±2.3V typ.
• 250MHz 3dB bandwidth
• 800V/µs slew rate
• Low distortion at 5MHz
• Single 5V or dual ±5V supplies
• 90mA maximum output current
• Low power - 8mA per channel
• Pb-free plus anneal available (RoHS compliant)
Applications
• Twisted-pair driver
• Differential line driver
• VGA over twisted-pair
• ADSL/HDSL driver
• Single ended to differential amplification
• Transmission of analog signals in a noisy environment
Pinouts
EL5171
(8 LD SO)
TOP VIEW
EL5371
(28 LD QSOP)
TOP VIEW
FBP 1
IN+ 2
+
REF 3
-
FBN 4
8 OUT+ NC 1
7 VS-
INP1 2
+
6 VS+ INN1 3
-
5 OUT- REF1 4
NC 5
INP2 6
INN2 7
REF2 8
+
NC 9
-
INP3 10
INN3 11
REF3 12
+
NC 13
-
EN 14
28 OUT1
27 FBP1
26 FBN1
25 OUT1B
24 VSP
23 VSN
22 OUT2
21 FBP2
20 FBN2
19 OUT2B
18 OUT3
17 FBP3
16 FBN3
15 OUT3B
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2004-2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.