EL5164 Datasheet, PDF (1/12 Pages) Intersil Corporation – 600MHz Current Feedback Amplifiers with Enable

®
Data Sheet
EL5164, EL5165, EL5364
June 22, 2004
FN7389.3
600MHz Current Feedback Amplifiers with
Enable
The EL5164, EL5165, and EL5364 are
current feedback amplifiers with a very
high bandwidth of 600MHz. This
makes these amplifiers ideal for today’s high speed video
and monitor applications.
With a supply current of just 5mA and the ability to run from
a single supply voltage from 5V to 12V, the amplifiers are
also ideal for hand held, portable or battery-powered
equipment.
The EL5164 also incorporates an enable and disable
function to reduce the supply current to 100µA typical per
amplifier. Allowing the CE pin to float or applying a low logic
level will enable the amplifier.
The EL5165 is offered in the 5-pin SOT-23 package, EL5164
is available in the 6-pin SOT-23 and the industry-standard 8-
pin SO packages, and the EL5364 in a 16-pin SO and 16-pin
QSOP packages. All operate over the industrial temperature
range of -40°C to +85°C.
Ordering Information
PART
NUMBER
PACKAGE
TAPE &
REEL
PKG.
DWG. #
EL5164IS
8-Pin SO
-
MDP0027
EL5164IS-T7
8-Pin SO
7”
MDP0027
EL5164IS-T13
8-Pin SO
13”
MDP0027
EL5164IW-T7
6-Pin SOT-23
7” (3K pcs) MDP0038
EL5164IW-T7A 6-Pin SOT-23 7” (250 pcs) MDP0038
EL5165IW-T7
5-Pin SOT-23
7” (3K pcs) MDP0038
EL5165IW-T7A 5-Pin SOT-23 7” (250 pcs) MDP0038
EL5165IC-T7
5-Pin SC-70
7” (3K pcs)
P5.049
EL5165IC-T7A
5-Pin SC-70
7” (250 pcs) P5.049
EL5364IS
16-Pin SO (0.150”)
-
MDP0027
EL5364IS-T7 16-Pin SO (0.150”)
7”
MDP0027
EL5364IS-T13 16-Pin SO (0.150”)
13”
MDP0027
EL5364IU
16-Pin QSOP
-
MDP0040
EL5364IU-T7
16-Pin QSOP
7”
MDP0040
EL5364IU-T13 16-Pin QSOP
13”
MDP0040
EL5364IUZ
(See Note)
16-Pin QSOP
(Pb-free)
-
MDP0040
EL5364IUZ-T7
(See Note)
16-Pin QSOP
(Pb-free)
7”
MDP0040
EL5364IUZ-
T13 (See Note)
16-Pin QSOP
(Pb-free)
13”
MDP0040
NOTE: Intersil Pb-free products employ special Pb-free material sets; molding
compounds/die attach materials and 100% matte tin plate termination finish,
which is compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J Std-020B.
Features
• 600MHz -3dB bandwidth
• 4700V/µs slew rate
• 5mA supply current
• Single and dual supply operation, from 5V to 12V supply
span
• Fast enable/disable (EL5164 & EL5364 only)
• Available in SOT-23 packages
• Dual (EL5264 & EL5265) and triple (EL5362 & EL5363)
also available
• High speed, 1GHz product available (EL5166 & EL5167)
• 300MHz product available (EL5162 family)
• Pb-free available
Applications
• Video amplifiers
• Cable drivers
• RGB amplifiers
• Test equipment
• Instrumentation
• Current to voltage converters
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002-2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.