EL5153 Datasheet, PDF (1/14 Pages) Intersil Corporation – 300MHz Amplifiers

®
PRELIMINARY
Data Sheet
EL5152, EL5153, EL5252, EL5455
February 17, 2005
FN7385.3
300MHz Amplifiers
The EL5152, EL5153, EL5252, and EL5455 are 300MHz
bandwidth -3dB voltage mode feedback amplifiers with DC
accuracy of < 0.01%, 1mV offsets and 50kV/V open loop
gains. These amplifiers are ideally suited for applications
ranging from precision measurement instrumentation to
high-speed video and monitor applications demanding
higher linearity at higher frequency. Capable of operating
with as little as 3.0mA of current from a single supply ranging
from 5V to 12V dual supplies ranging from ±2.5V to ±5.0V
these amplifiers are also well suited for handheld, portable
and battery-powered equipment.
Single amplifiers are offered in SOT-23 packages and duals
in a 10-pin MSOP package for applications where board
space is critical. Quad amplifiers are available in a 14-pin SO
package. Additionally, singles and duals are available in the
industry-standard 8-pin SO. All parts operate over the
industrial temperature range of -40°C to +85°C.
Ordering Information
PART
NUMBER
PACKAGE TAPE & REEL PKG. DWG. #
EL5152IS
8-Pin SO
-
MDP0027
EL5152IS-T7
8-Pin SO
7”
MDP0027
EL5152IS-T13 8-Pin SO
13”
MDP0027
EL5152ISZ
8-Pin SO
-
MDP0027
(See Note)
(Pb-free)
EL5152ISZ-T7
(See Note)
8-Pin SO
(Pb-free)
7”
MDP0027
EL5152ISZ-
8-Pin SO
13”
MDP0027
T13 (See Note) (Pb-free)
EL5153IW-T7 5-Pin SOT-23 7” (3K pcs)
MDP0038
EL5153IW-T7A 5-Pin SOT-23 7” (250 pcs)
MDP0038
EL5153IWZ-T7 5-Pin SOT-23
(See Note)
(Pb-free)
7” (3K pcs)
MDP0038
EL5153IWZ- 5-Pin SOT-23 7” (250 pcs)
T7A (See Note) (Pb-free)
MDP0038
EL5252IY
10-Pin MSOP
-
MDP0043
EL5252IY-T7 10-Pin MSOP
7”
MDP0043
EL5252IY-T13 10-Pin MSOP
13”
MDP0043
EL5455IS
14-Pin SO
-
MDP0027
EL5455IS-T7
14-Pin SO
7”
MDP0027
EL5455IS-T13 14-Pin SO
13”
MDP0027
NOTE: Intersil Pb-free products employ special Pb-free material sets; molding
compounds/die attach materials and 100% matte tin plate termination finish,
which are RoHS compliant and compatible with both SnPb and Pb-free
soldering operations. Intersil Pb-free products are MSL classified at Pb-free
peak reflow temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Features
• 270MHz -3dB bandwidth
• 180V/µs slew rate
• ±1mV maximum V_OS
• Very high open loop gains 50kV/V
• Low supply current = 3mA
• 105mA output current
• Single supplies from 5V to 12V
• Dual supplies from ±2.5V to ±5V
• Fast disable on the EL5152 and EL5252
• Low cost
• Pb-Free available (RoHS compliant)
Applications
• Imaging
• Instrumentation
• Video
• Communications devices
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2004, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.