EL5100 Datasheet, PDF (1/11 Pages) Intersil Corporation – 200MHz Slew Enhanced VFA

®
Data Sheet
EL5100, EL5101, EL5300
September 22, 2004
FN7330.1
200MHz Slew Enhanced VFA
The EL5100, EL5101, and EL5300 represent high-speed
voltage feedback amplifiers based on the current feedback
amplifier architecture. This gives the typical high slew rate
benefits of a CFA family along with the stability and ease of
use associated with the VFA type architecture. This family is
available in single, dual, and triple versions, with 200MHz,
400MHz, and 700MHz versions. This family operates on
single 5V or ±5V supplies from minimum supply current. The
EL5100 and EL5300 also feature an output enable function,
which can be used to put the output in to a high-impedance
mode. This enables the outputs of multiple amplifiers to be
tied together for use in multiplexing applications.
Ordering Information
PART
NUMBER
PACKAGE TAPE & REEL PKG. DWG. #
EL5100IS
8-Pin SO
-
MDP0027
EL5100IS-T7
8-Pin SO
7”
MDP0027
EL5100IS-T13 8-Pin SO
13”
MDP0027
EL5100IW-T7 6-Pin SOT-23 7” (3K pcs)
MDP0038
EL5100IW-T7A 6-Pin SOT-23 7” (250 pcs)
MDP0038
EL5101IC-T7
SC-70
7” (3K pcs)
EL5101IC-T7A
SC-70
7” (250 pcs)
EL5101IW-T7 5-Pin SOT-23 7” (3K pcs)
MDP0038
EL5101IW-T7A 5-Pin SOT-23
EL5300IU
16-Pin QSOP
7” (250 pcs)
-
MDP0038
MDP0040
EL5300IU-T7 16-Pin QSOP
7”
MDP0040
EL5300IU-T13 16-Pin QSOP
13”
MDP0040
EL5300IUZ
16-Pin QSOP
-
(See Note)
(Pb-free)
MDP0040
EL5300IUZ-T7 16-Pin QSOP
7”
(See Note)
(Pb-free)
MDP0040
EL5300IUZ-
16-Pin QSOP
13”
T13 (See Note) (Pb-free)
MDP0040
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which is compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020C.
Features
• Pb-free available as an option
• Specified for 5V or ±5V applications
• Power-down to 17µA/amplifier
• -3dB bandwidth = 200MHz
• ±0.1dB bandwidth = 20MHz
• Low supply current = 2.5mA
• Slew rate = 2200V/µs
• Low offset voltage = 4mV max
• Output current = 100mA
• A_VOL = 1000
• Diff gain/phase = 0.08%/0.1°
Applications
• Video amplifiers
• PCMCIA applications
• A/D drivers
• Line drivers
• Portable computers
• High speed communications
• RGB applications
• Broadcast equipment
• Active filtering
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.