EL4340_06 Datasheet, PDF (1/13 Pages) Intersil Corporation – 500MHz Triple, Multiplexing Amplifiers

®
Data Sheet
EL4340, EL4342
February 23, 2006
FN7421.2
500MHz Triple, Multiplexing Amplifiers
The EL4340 and EL4342 are fixed unity gain mux amps
featuring high slew rates and excellent bandwidth for video
switching. These devices feature a high impedance output
state (HIZ) that enables the outputs of multiple devices to be
wired together. A power-down mode (ENABLE) is included
to turn off un-needed circuitry in power sensitive
applications. The ENABLE pin, when pulled high, sets the
EL4340 and EL4342 into standby power mode - consuming
just 18mW. An added feature in the EL4340 is a latch enable
function (LE) that allows independent logic control using a
common logic bus.
Ordering Information
PART TAPE &
PART NUMBER MARKING REEL
PACKAGE
PKG.
DWG. #
EL4340IU
EL4340IU
- 24 Ld QSOP
MDP0040
EL4340IU-T7 EL4340IU 7” 24 Ld QSOP
MDP0040
EL4340IU-T13 EL4340IU 13” 24 Ld QSOP
MDP0040
EL4340IUZ
(Note)
EL4340IUZ - 24 Ld QSOP
(Pb-free)
MDP0040
EL4340IUZ-T7 EL4340IUZ 7” 24 Ld QSOP
(Note)
(Pb-free)
MDP0040
EL4340IUZ-T13 EL4340IUZ 13” 24 Ld QSOP
(Note)
(Pb-free)
MDP0040
EL4342ILZA
(Note)
4342ILZ
EL4342ILZA-T7 4342ILZ
(Note)
- 32 Ld Exposed Pad MDP0046
3.6x4.6 QFN
(Pb-free)
7” 32 Ld Exposed Pad MDP0046
3.6x4.6 QFN
(Pb-free)
EL4342ILZA-T13 4342ILZ
(Note)
13” 32 Ld Exposed Pad MDP0046
3.6x4.6 QFN
(Pb-free)
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100% matte
tin plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
Related Literature
• AN1182, EL4340EVAL1 Evaluation Board User's Guide
• AN1193, ISL59445/EL4342E1 Evaluation Board User's
Guide
Features
• Triple 2:1 and 4:1 multiplexers for RGB
• Internally set gain-of-1
• High speed three-state outputs (HIZ)
• Power-down mode (ENABLE)
• Latch enable (EL4340)
• ±5V operation
• ±870 V/µs slew rate
• 500MHz bandwidth
• Typical supply currents 10mA/ch (EL4340) and 15.3mA/ch
(EL4342)
• Pb-free plus anneal available (RoHS compliant)
Applications
• HDTV/DTV analog inputs
• Video projectors
• Computer monitors
• Set-top boxes
• Security video
• Broadcast video equipment
TABLE 1. CHANNEL SELECT LOGIC TABLE EL4340
S0 ENABLE HIZ
LE
OUTPUT
0
0
0
0
INO (A, B, C)
1
0
0
0
IN1 (A, B, C)
X
1
X
X
Power-down
X
0
1
X
High Z
X
0
0
1
Last S0 State
Preserved
TABLE 2. CHANNEL SELECT LOGIC TABLE EL4342
S1
S0 ENABLE HIZ
OUTPUT
0
0
0
0
IN0 (A, B, C)
0
1
0
0
IN1 (A, B, C)
1
0
0
0
IN2 (A, B, C)
1
1
0
0
IN3 (A, B, C)
X
X
1
X
Power-down
X
X
0
1
High Z
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2005-2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.