EL2210 Datasheet, PDF (1/11 Pages) Intersil Corporation – Low Cost, Dual, Triple and Quad Video Op Amps

cN1o-On8t8aR8cE-tINCOoTOBuE^{®MSr ROTMSeLEcIELNhTnDoEiDrEcPwaaDRltwaRSOwEuSD.pPihUnpLetCoAeeTrrCttsEiCl.MecnoEtmNeTr/tastc}
EL2210/11, EL2310/11, EL2410/11
August 6, 2001
FN7057
Low Cost, Dual, Triple and Quad Video Op
Amps
This family of dual, triple, and quad
operational amplifiers built using
Elantec's Complementary Bipolar
process offers unprecedented high frequency performance
at a very low cost. They are suitable for any application such
as consumer video, where traditional DC performance
specifications are of secondary importance to the high
frequency specifications. On ±5V supplies at a gain of +1 the
EL2210, EL2310, and EL2410 will drive a 150Ω load to +2V,
-1V with a bandwidth of 50MHz and a channel-to-channel
isolation of 60dB or more. At a gain of +2, the EL2211,
EL2311, and EL2411 will drive a 150Ω load to +2V, -1V with
a bandwidth of 100MHz with the same channel-to-channel
isolation. All four achieve 0.1dB bandwidth at 5MHz.
The power supply operating range is fixed at ±5V or +10/0V.
In single supply operation the inputs and outputs will operate
to ground. Each amplifier draws only 7mA of supply current.
Features
• Stable at gain of 2 and 100MHz gain_bandwidth product
(EL2211, EL2311, & EL2411)
• Stable at gain of 1 and 50MHz gain_bandwidth product
(EL2210, EL2310, & EL2410)
• 130V/µs slew rate
• Drives 150Ω load to video levels
• Inputs and outputs operate at negative supply rail
• ±5V or +10V supplies
• -60dB isolation at 4.2MHz
Applications
• Consumer video amplifiers
• Active filters/integrators
• Cost-sensitive application
• Single supply amplifiers
Ordering Information
PART NUMBER
EL2210CN
EL2210CS
EL2210CS-T7
EL2210CS-T13
EL2211CN
PACKAGE
8-Pin PDIP
8-Pin SO
8-Pin SO
8-Pin SO
8-Pin PDIP
TAPE & REEL PKG. NO.
-
MDP0031
-
MDP0027
7”
MDP0027
13”
MDP0027
-
MDP0031
EL2211CS
EL2310CN
EL2310CS
EL2311CN
EL2311CS
EL2410CN
EL2410CS
EL2410CS-T7
EL2410CS-T13
EL2411CN
8-Pin SO
8-Pin PDIP
8-Pin SO
8-Pin PDIP
8-Pin SO
14-Pin PDIP
14-Pin SO
14-Pin SO
14-Pin SO
14-Pin PDIP
-
MDP0027
-
MDP0031
-
MDP0027
-
MDP0031
-
MDP0027
-
MDP0031
-
MDP0027
7”
MDP0027
13”
MDP0027
-
MDP0031
EL2411CS
14-Pin SO
-
MDP0027
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.