EL2166 Datasheet, PDF (1/15 Pages) Intersil Corporation – 110MHz Current Feedback Amplifier with Disable

cN1^{®o-On8t8aR8cE-tICNOoTODBuEMSarRtOTMaSeLEcISELNhhTnDoeEirEcePwaDtRlwRSOwEuD.pPiUnpLtCoAeTrrCtsEiCl.MecnoEtmNeDTr/etasctcember 1995, Rev C}
EL2166
FN7052
110MHz Current Feedback Amplifier with
Disable
The EL2166 is a current feedback
operational amplifier with -3dB
bandwidth of 110MHz at a gain of +2.
Built using the Elantec proprietary monolithic
complementary bipolar process, this amplifier uses current
mode feedback to achieve more bandwidth at a given gain
than a conventional voltage feedback operational amplifier.
The EL2166 is designed to drive a double terminated 75Ω
coax cable to video levels. Differential gain and phase are
excellent when driving both loads of 500Ω (< 0.01%/< 0.01°)
and double terminated 75Ω cables (0.025%/0.05° @
V_S = ±15V, 0.04%/0.02° @ V_S = ±5V).
The EL2166 has a superior output disable function. Time to
enable or disable is < 75ns. The DISABLE pin is TTL/CMOS
compatible. In disable mode, the amplifier can withstand
over 1500V/µs signals at their outputs. The amplifier can
operate on any supply voltage from 10V (±5V) to 33V
(±16.5V), yet consume only 7.5mA at any supply voltage.
The EL2166 is available in 8-pin PDIP and 8-pin SO
packages.
Pinout
EL2166
(8-PIN SO, PDIP)
TOP VIEW
Features
• 110MHz 3dB bandwidth
(A_V = +2)
• 115MHz 3dB bandwidth
(A_V = +1)
• 0.01% differential gain, R_L = 500Ω
• 0.01° differential phase, R_L = 500Ω
• Low supply current, 7.5mA
• Fast disable < 75ns
• Low cost
• 1500 V/µs slew rate
Applications
• Video amplifiers
• Cable drivers
• RGB amplifiers
• Test equipment amplifiers
• Current to voltage converters
• Broadcast equipment
• High speed communications
• Video multiplexing
Ordering Information
PART
NUMBER TEMP. RANGE
EL2166CN -40°C to +85°C
EL2166CS -40°C to +85°C
PACKAGE
8-Pin PDIP
8-Pin SOIC
PKG. NO.
MDP0031
MDP0027
Manufactured under U.S. Patent No. 5,420,542, 4,893,091
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.