EL2111 Datasheet, PDF (1/6 Pages) Intersil Corporation – Low Cost, Gain of 2, Video Op Amp

®_{c1No-On8t8aR8cE-tINCOoDTOBuaEMSrtROTaMSeLEcSIELNhhTnoDEeirEcePwaDt}RlwRSOwEuD.pPiUnpLtCoAeTrrCtsEiCl.MecnoEtmNeTr/tastc _{November 14, 2002}
EL2111
FN7043
Low Cost, Gain of 2, Video Op Amp
The EL2111 operational amplifier, built
using Elantec’s complementary bipolar
process, offers unprecedented high
frequency performance at a very low cost. It is suitable for
any application, such as consumer video, where traditional
DC performance specifications are of secondary importance
to the high frequency specifications. On a 5V supply at a
gain of +2 the EL2111 will drive a 150Ω load to +2V, with a
bandwidth of 100MHz. This device achieves 0.1dB
bandwidth at 5MHz.
The recommended power supply voltage is 5V. At zero and
5V supplies, the inputs will operate to ground. When the
outputs are at 0V the amplifier draws only 2.4mA of supply
current.
Features
• Optimized for 5V operation
• Stable at gain of 2
• 100MHz gain bandwidth product
• 130V/µs slew rate
• Drives 150Ω load to video levels
• Input and outputs operate at negative supply rail
Applications
• Consumer video amplifier
• Active filters/integrators
• Cost sensitive applications
• Single supply amplifiers
Ordering Information
PART
NUMBER
PACKAGE TAPE & REEL
EL2111CN
8-Pin PDIP
-
EL2111CS
8-Pin SO
-
EL2111CW
5-Pin SOT-23*
-
PKG. NO.
MDP0031
MDP0027
MDP0038
Pinouts
EL2111
(5-PIN SOT23)
TOP VIEW
OUT 1
-
GND 2
+
IN+ 3
5 VS+
4 IN-
*EL2111CW symbol is .Exxx where xxx represents date code
EL2111
(8-PIN PDIP, SO)
TOP VIEW
NC 1
8 NC
IN- 2
-
+
IN+ 3
7 VS+
6 OUT
GND 4
5 NC
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.