|
EL2030 Datasheet, PDF (1/12 Pages) Elantec Semiconductor – 120 MHz Current Feedback Amplifier | |||
|
®
cN1o-On8t8Ra8DcE-tIOaCNotOBTuaESMrROSTMSeLhEcIELeNhTenDoEitrEcPwDaRlwRSOwEuD.PpiUnpLtCoAeTrrCtsEiClM.ecnEotmNeDTr/teasctcember 1995, Rev. F
EL2030
FN7028
120MHz Current Feedback Amplifier
The EL2030 is a very fast, wide
bandwidth amplifier optimized for
gains between -10 and +10. Built using
the Elantec monolithic Complementary Bipolar process, this
amplifier uses current mode feedback to achieve more
bandwidth at a given gain than a conventional voltage
feedback operational amplifier.
Due to its wide operating supply range (±15V) and extremely
high slew rate of 2000V/µs, the EL2030 drives ±10V into
200⦠at a frequency of 30MHz, while achieving 110MHz of
small signal bandwidth at AV = +2. This bandwidth is still
95MHz for a gain of +10. On ±5V supplies the amplifier
maintains a 90MHz bandwidth for AV = +2. When used as a
unity gain buffer, the EL2030 has a 120MHz bandwidth with
the gain precision and low distortion of closed loop buffers.
The EL2030 features extremely low differential gain and
phase, a low noise topology that reduces noise by a factor of
2 over competing amplifiers, and settling time of 40ns to
0.25% for a 10V step. The output is short circuit protected. In
addition, datasheet limits are guaranteed for ±5V and ±15V
supplies.
Elantec's products and facilities comply with applicable
quality specifications. See Elantec document, QRA-1:
Processing, Monolithic Integrated Circuits.
Ordering Information
PART NUMBER
EL2030CN
EL2030CM
TEMP. RANGE
-40°C to +85°C
-40°C to +85°C
PACKAGE
8-Pin PDIP
20-Pin SOL
PKG. NO.
MDP0031
MDP0027
Pinouts
EL2030
(8-PIN PDIP)
TOP VIEW
Features
⢠-3dB bandwidth = 120MHz, AV = 1
⢠-3dB bandwidth = 110MHz, AV = 2
⢠0.01% differential gain and 0.01° differential phase (NTSC,
PAL)
⢠0.05% differential gain and 0.02° differential phase
(HDTV)
⢠Slew rate 2000V/µs
⢠65mA output current
⢠Drives ±10V into 200⦠load
⢠Characterized at ±5V and ±15V
⢠Low voltage noise
⢠Current mode feedback
⢠Settling time of 40ns to 0.25% for a 10V step
⢠Output short circuit protected
⢠Low cost
Applications
⢠Video gain block
⢠Video distribution amplifier
⢠HDTV amplifier
⢠Residue amplifiers in ADC
⢠Current to voltage converter
⢠Coax cable driver
EL2030
(20-PIN SOL)
TOP VIEW
NOTE: Non-Designated pins are no connects and are not electrically connected internally. Manufactured under U.S. Patent No. 4,893,091.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.
|
▷ |