|
EL2018 Datasheet, PDF (1/12 Pages) Intersil Corporation – Fast, High Voltage Comparator with Transparent Latch | |||
|
® cN1o-On8t8Ra8cE-DtIOCNoaOBTuEtSMraROTMSeLSEcIELNhhTnDoeEirEcePwDatRlwRSOwEuD.PpiUnpLCtoAeTrrCtsEiClM.ecnEotmNeTr/tastDc ecember 1995, Rev. G
EL2018
FN7024
Fast, High Voltage Comparator with
Transparent Latch
The EL2018 represents a quantum
leap forward in comparator speed,
accuracy and functionality.
Manufactured with Elantec's proprietary Complementary
Bipolar process, this device uses fast PNP and NPN
transistors in the signal path. A unique circuit design gives
the inputs the ability to handle large common mode and
differential mode signals, yet retain high speed and excellent
accuracy. Careful design of the front end insures the part
maintains speed and accuracy when operating with a mix of
small and large signals. The three-state output stage is
designed to be TTL compatible for any power supply
combination, yet it draws a constant current and does not
generate glitches. When the output is disabled, the supply
current consumption drops by 50%, but the input stage and
latch remain active.
Elantec facilities comply with MIL-I-45208A and other
applicable quality specifications. For information on Elantec's
processing, see QRA1: Elantec's Processing-Monolithic
Products.
Ordering Information
PART
NUMBER
EL2018CN
TEMP.
RANGE
-40°C to +85°C
PACKAGE
8-Pin PDIP
Pinout
EL2018
(8-PIN PDIP)
TOP VIEW
PKG. NO.
MDP0031
Features
⢠Fast response timeâ20ns
⢠Wide input differential voltage rangeâ24V to ±15V
supplies
⢠Precision input stageâVOS = 1mV
⢠Low input bias currentâIB = 100nA
⢠Low input offset currentâIOS = 30nA
⢠±4.5V to ±18V supplies
⢠Three-State TTL and CMOS compatible output
⢠No supply current glitch during switching
⢠High voltage gainâ40V/mV
⢠50% power reduction in shutdown mode
⢠Input and latch remain active in shutdown mode
⢠P/N compatible with industry standard comparators
Applications
⢠Analog to digital converters
⢠ATE pin receiver
⢠Precision crystal oscillators
⢠Zero crossing detector
⢠Window detector
⢠Pulse width modulation generator
⢠âGo/no-goâ detector
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.
|
▷ |