EL1510 Datasheet, PDF (1/10 Pages) Intersil Corporation – Medium Power Differential Line Driver

®
Data Sheet
March 26, 2007
EL1510
FN7122.2
Medium Power Differential Line Driver
The EL1510 is a dual operational amplifier designed for
central office and customer premise line driving in both
SDSL and ADSL solutions. This device features a high drive
capability of 250mA while consuming only 7.5mA of supply
current per amplifier, operating from ±12V supplies. This
driver achieves a typical distortion of less than -85dBc, at
150kHz into a 25Ω load. The EL1510 is available in the
power 8 Ld DFN package and is specified for operation over
the full -40°C to +85°C temperature range. The DFN
package has the potential for a very low junction to ambient
thermal resistance of 43°C/W, making it suitable for high
power applications. The EL1510 is in the 8 Ld SOIC
package and thus is limited to applications where the power
dissipation in the device is less than 781mW.
The EL1510 is ideal for CPE modem applications in ADSL,
HDSL2, G.SHDSL, and VDSL.
Pinouts
EL1510
(8 LD SOIC)
TOP VIEW
OUTA 1
8 VS
INA- 2
-
7 OUTB
+
INA+ 3
6 INB-
-
GND 4
+
5 INB+
EL1510
(8 LD DFN)
TOP VIEW
OUTA 1
INA- ₂
INA+ ₃
GND 4
-
+
Amp A
-
+
Amp B
8 VS
7 OUTB
6 INB-
5 INB+
Features
• 40V_P-P differential output drive into 100Ω
• -85dBc typical driver output distortion at full output at
150kHz
• Low quiescent current of 7.5mA per amplifier
• Pb-free plus anneal available (RoHS compliant)
Applications
• ADSL G.lite CO line driving
• G.SHDSL, HDSL2 line drivers
• ADSL full rate CPE line driving
• Video distribution amplifiers
• Video twisted-pair line drivers
Ordering Information
PART TAPE &
PKG.
PART NUMBER MARKING REEL PACKAGE DWG. #
EL1510CS
1510CS
- 8 Ld SOIC MDP0027
EL1510CS-T7 1510CS
7” 8 Ld SOIC MDP0027
EL1510CS-T13 1510CS
13” 8 Ld SOIC MDP0027
EL1510CSZ
(See Note)
1510CSZ
- 8 Ld SOIC MDP0027
(Pb-Free)
EL1510CSZ-T7 1510CSZ
(See Note)
7” 8 Ld SOIC MDP0027
(Pb-Free)
EL1510CSZ-T13 1510CSZ
(See Note)
13” 8 Ld SOIC MDP0027
(Pb-Free)
EL1510CL
1510CL
- 8 Ld DFN MDP0047
EL1510CL-T7 1510CL
7” 8 Ld DFN MDP0047
EL1510CL-T13 1510CL
13” 8 Ld DFN MDP0047
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with
both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020C.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002, 2004, 2007. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.