CDP1823C Datasheet, PDF (1/6 Pages) Intersil Corporation – High-Reliability CMOS 128-Word x 8-Bit Static RAM

CDP1823C/3
March 1997
High-Reliability CMOS
128-Word x 8-Bit Static RAM
Features
• For Applications in Aerospace, Military, and Critical
Industrial Equipment
• Compatible with CDP1800-Series Microprocessors at
Maximum Speed
• Interfaces with CDP1800-Series Microprocessors
without Additional Components
• Fast Access Time
• At V_DD = 5V, +25^oC . . . . . . . . . . . . . . . . . . . . . . . . 275ns
• Single Voltage Supply
• Common Data Inputs and Outputs
• Multiple Chip Select Inputs to Simplify Memory
System Expansion
• High Noise Immunity . . . . . . . . . . . . . . . . . . 30% of V_DD
• Memory Retention for Standby Battery Voltage Down
to 2V at 25^oC
• Latch-Up-Free Transient Radiation Tolerance
Ordering Information
PART NUMBER
PACKAGE TEMP. RANGE
(5V)
SBDIP
-55^oC to +125^oC CDP1823CD3
PKG. NO.
D24.6
Description
The CDP1823C/3 is a 128 word x 8-bit CMOS/SOS static
random access memory. It is compatible with the CDP1802,
CDP1804, CDP1805, and CDP1806 microprocessors, and
will interface directly without additional components. The
CDP1823C has a recommended operating voltage range of
4V to 6.5V.
The CDP1823C memory has 8 common data input and data
output terminals for direct connection to a bidirectional data
bus and is operated from a single voltage supply. Five chip
select inputs are provided to simplify memory system
expansion. In order to enable the CDP1823C, the chip select
inputs CS2, CS3, and CS5 require a low input signal, and
the chip select inputs CS1 and CS4 require a high input
signal.
The MRD signal enables all 8 output drivers when in the low
state and should be in a high state during a write cycle.
After valid data appear at the output, the address inputs may
be changed immediately. Output data will be valid until either
the MRD signal goes high, the device is deselected, or t_AA
(access time) after address changes.
Pinout
CDP1823C/3
(SBDIP)
TOP VIEW
BUS 0 1
BUS 1 2
BUS 2 3
BUS 3 4
BUS 4 5
BUS 5 6
BUS 6 7
BUS 7 8
CS1 9
CS2 10
CS3 11
V_SS 12
24 V_DD
23 A0
22 A1
21 A2
20 A3
19 A4
18 A5
17 A6
16 MWR
15 MRD
14 CS5
13 CS4
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
6-31
File Number 2982.1