CD4016BMS Datasheet, PDF (1/10 Pages) Intersil Corporation – CMOS Quad Bilateral Switch

CD4016BMS
November 1994
CMOS Quad Bilateral Switch
Features
Applications
• Transmission or Multiplexing of Analog or Digital Signals • Analog Signal Switching/Multiplexing
• High Voltage Type (20V Rating)
• Signal Gating
• 20V Digital or ±10V Peak-to-Peak Switching
• 280Ω Typical On-State Resistance for 15V Operation
• Squelch Control
• Chopper
• Switch On-State Resistance Matched to Within 10Ω
Typ. Over 15V Signal Input Range
• High On/Off Output Voltage Ratio: 65dB Typ. at FIS =
10kHz, RL = 10kΩ
• High Degree of Linearity: <0.5% Distortion Typ. at FIS
= 1kHz, VIS = 5Vp-p, VDD-VSS ≥ 10V, RL = 10kΩ
• Extremely Low Off State Switch Leakage Resulting in
Very Low Offset Current and High Effective Off State
Resistance: 100pA Typ. at VDD-VSS = 18V, T_A = 25^oC
• Extremely High Control Input Impedance (Control cir-
cuit Isolated from Signal Circuit: 10¹²â„¦ Typ.
• Low Crosstalk Between Switches: -50dB Typ. at FIS =
0.9MHz, RL = 1kΩ
• Matched Control Input to Signal Output
Capacitance: Reduces Output Signal Transients
• Frequency Response, Switch On = 40MHz (Typ.)
• 100% Tested for Quiescent Current at 20V
• Maximum Control Input Current of 1µA at 18V Over Full
Package Temperature Range; 100nA at 18V at +25^oC
• 5V, 10V and 15V Parametric Ratings
• Modulator
• Demodulator
• Commutating Switch
• Digital Signal Switching/Multiplexing
• CMOS Logic Implementation
• Analog to Digital & Digital to Analog Conversion
• Digital Control of Frequency, Impedance, Phase, and
Analog Signal Gain
Description
CD4016BMS Series types are quad bilateral switches intended
for the transmission or multiplexing of analog or digital signals.
Each of the four independent bilateral switches has a single con-
trol signal input which simultaneously biases both the p and n
device in a given switch on or off.
The CD4016BMS is supplied in these 14 lead outline packages:
Braze Seal DIP H4Q
Frit Seal DIP
H1B
Ceramic Flatpack H3W
Pinout
CD4016BMS
TOP VIEW
SIG A IN 1
SIG A OUT 2
SIG B IN 3
SIG B OUT 4
CONTROL B 5
CONTROL C 6
VSS 7
14 VDD
13 CONTROL A
12 CONTROL D
11 SIG D IN
10 SIG D OUT
9 SIG C OUT
8 SIG C IN
Functional Diagram
IN/OUT 1
SIG A
SW
A
OUT/IN 2
OUT/IN 3
SW
D
SIG B
IN/OUT 4
SW
CONTROL B 5
B
CONTROL C 6
SW
C
VSS 7
14 VDD
13 CONTROL A
12 CONTROL D
11 IN/OUT
SIG D
10 OUT/IN
9 OUT/IN
SIG C
8 IN/OUT
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
7-733
File Number 3296