CA3102 Datasheet, PDF (1/11 Pages) Intersil Corporation – Dual High Frequency Differential Amplifier For Low Power Applications Up to 500MHz

Data Sheet
CA3102
November 1999
File Number 611.6
Dual High Frequency Differential Amplifier
For Low Power Applications Up to
500MHz
The CA3102 consists of two independent differential
amplifiers with associated constant current transistors on a
common monolithic substrate. The six transistors which
comprise the amplifiers are general purpose devices which
exhibit low 1/f noise and a value of f_T in excess of 1GHz.
These features make the CA3102 useful from DC to
500MHz. Bias and load resistors have been omitted to
provide maximum application flexibility.
The monolithic construction of the CA3102 provides close
electrical and thermal matching of the amplifiers. This
feature makes this device particularly useful in dual channel
applications where matched performance of the two
channels is required.
The CA3102 has a separate substrate connection for greater
design flexibility.
Ordering Information
PART NUMBER TEMP.
(BRAND)
RANGE (^oC)
PACKAGE
CA3102E
-55 to 125 14 Ld PDIP
CA3102M
(3102)
-55 to 125 14 Ld SOIC
PKG.
NO.
E14.3
M14.15
Features
• Power Gain 23dB (Typ). . . . . . . . . . . . . . . . . . . . . 200MHz
• Noise Figure 4.6dB (Typ) . . . . . . . . . . . . . . . . . . . 200MHz
• Two Differential Amplifiers on a Common Substrate
• Independently Accessible Inputs and Outputs
• Full Military Temperature Range . . . . . . . -55^oC to 125^oC
Applications
• VHF Amplifiers
• VHF Mixers
• Multifunction Combinations - RF/Mixer/Oscillator;
Converter/IF
• IF Amplifiers (Differential and/or Cascode)
• Product Detectors
• Doubly Balanced Modulators and Demodulators
• Balanced Quadrature Detectors
• Cascade Limiters
• Synchronous Detectors
• Balanced Mixers
• Synthesizers
• Balanced (Push-Pull) Cascode Amplifiers
• Sense Amplifiers
Pinout
CA3102
(PDIP, SOIC)
TOP VIEW
1
2
3
4
SUBSTRATE 5
6
7
14
13
12 SUBSTRATE
11
10
9
8
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 407-727-9207 | Copyright © Intersil Corporation 1999