ACTS541MS Datasheet, PDF (1/3 Pages) Intersil Corporation – Radiation Hardened Octal Three-State Buffer/Line Driver

ACTS541MS
January 1996
Radiation Hardened Octal
Three-State Buffer/Line Driver
Features
• Devices QML Qualified in Accordance with MIL-PRF-38535
• Detailed Electrical and Screening Requirements are Contained in
SMD# 5962-96726 and Intersil’s QM Plan
• 1.25 Micron Radiation Hardened SOS CMOS
• Total Dose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >300K RAD (Si)
• Single Event Upset (SEU) Immunity: <1 x 10^-10 Errors/Bit/Day
(Typ)
• SEU LET Threshold . . . . . . . . . . . . . . . . . . . . . . . >100 MEV-cm²/mg
• Dose Rate Upset . . . . . . . . . . . . . . . . >10¹¹ RAD (Si)/s, 20ns Pulse
• Dose Rate Survivability . . . . . . . . . . . >10¹² RAD (Si)/s, 20ns Pulse
• Latch-Up Free Under Any Conditions
• Military Temperature Range . . . . . . . . . . . . . . . . . . -55^oC to +125^oC
• Significant Power Reduction Compared to ALSTTL Logic
• DC Operating Voltage Range . . . . . . . . . . . . . . . . . . . . 4.5V to 5.5V
• Input Logic Levels
- VIL = 0.8V Max
- VIH = VCC/2 Min
• Input Current ≤ 1µA at VOL, VOH
• Fast Propagation Delay . . . . . . . . . . . . . . . . 21ns (Max), 14ns (Typ)
Description
The Intersil ACTS541MS is a Radiation Hardened Octal Buffer/Line
Driver, with three-state outputs. The output enable pins OE1, OE2
control the three-state outputs. If either enable is high the output will be
in a high impedance state. For data output both enables must be low.
The ACTS541MS utilizes advanced CMOS/SOS technology to achieve
high-speed operation. This device is a member of a radiation hardened,
high-speed, CMOS/SOS Logic family.
The ACTS541MS is supplied in a 20 lead Ceramic Flatpack (K suffix) or
a Ceramic Dual-In-Line package (D suffix).
Pinouts
20 LEAD CERAMIC DUAL-IN-LINE
MIL-STD-1835 DESIGNATOR,
CDIP2-T20, LEAD FINISH C
TOP VIEW
OE1 1
A0 2
A1 3
A2 4
A3 5
A4 6
A5 7
A6 8
A7 9
GND 10
20 VCC
19 OE2
18 Y0
17 Y1
16 Y2
15 Y3
14 Y4
13 Y5
12 Y6
11 Y7
20 LEAD CERAMIC FLATPACK
MIL-STD-1835 DESIGNATOR,
CDFP4-F20, LEAD FINISH C
TOP VIEW
OE1
1
A0
2
A1
3
A2
4
A3
5
A4
6
A5
7
A6
8
A7
9
GND
10
20
VCC
19
OE2
18
Y0
17
Y1
16
Y2
15
Y3
14
Y4
13
Y5
12
Y6
11
Y7
Ordering Information
PART NUMBER
5962F9672601VRC
5962F9672601VXC
ACTS541D/Sample
ACTS541K/Sample
ACTS541HMSR
TEMPERATURE RANGE
-55^oC to +125^oC
-55^oC to +125^oC
25^oC
25^oC
25^oC
SCREENING LEVEL
MIL-PRF-38535 Class V
MIL-PRF-38535 Class V
Sample
Sample
Die
PACKAGE
20 Lead SBDIP
20 Lead Ceramic Flatpack
20 Lead SBDIP
20 Lead Ceramic Flatpack
Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
1
Spec Number 518891
File Number 4094