80C88_08 Datasheet, PDF (1/38 Pages) Intersil Corporation – CMOS 8-/16-Bit Microprocessor

®
Data Sheet
February 22, 2008
80C88
FN2949.4
CMOS 8-/16-Bit Microprocessor
The Intersil 80C88 high performance 8-/16-bit CMOS CPU is
manufactured using a self-aligned silicon gate CMOS
process (Scaled SAJI IV). Two modes of operation,
MINimum for small systems and MAXimum for larger
applications such as multiprocessing, allow user
configuration to achieve the highest performance level.
Full TTL compatibility (with the exception of CLOCK) and
industry-standard operation allow use of existing NMOS
8088 hardware and Intersil CMOS peripherals.
Complete software compatibility with the 80C86, 8086, and
8088 microprocessors allows use of existing software in new
designs.
Ordering Information
Features
• Compatible with NMOS 8088
• Direct Software Compatibility with 80C86, 8086, 8088
• 8-Bit Data Bus Interface; 16-Bit Internal Architecture
• Completely Static CMOS Design
- DC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5MHz (80C88)
- DC . . . . . . . . . . . . . . . . . . . . . . . . . . . .8MHz (80C88-2)
• Low Power Operation
- ICCSB. . . . . . . . . . . . . . . . . . . . . . . . . 500µA Maximum
- ICCOP . . . . . . . . . . . . . . . . . . . . . 10mA/MHz Maximum
• 1 Megabyte of Direct Memory Addressing Capability
• 24 Operand Addressing Modes
• Bit, Byte, Word, and Block Move Operations
• 8-Bit and 16-Bit Signed/Unsigned Arithmetic
• Bus-Hold Circuitry Eliminates Pull-up Resistors
• Wide Operating Temperature Ranges
- C80C88 . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
- I80C88 . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
- M80C88 . . . . . . . . . . . . . . . . . . . . . . . . -55°C to +125°C
• Pb-Free Available (RoHS Compliant)
PART NUMBER
(5MHz)
PART
MARKING
CP80C88
CP80C88
IP80C88
IP80C88
MD80C88/B
MD80C88/B
PART NUMBER
(8MHz)
PART
MARKING
CP80C88-2
CP80C88-2
IP80C88-2
IP80C88-2
TEMPERATURE
RANGE
(°C)
PACKAGE
0 to +70
40 LD PDIP
-40 to +85
40 LD PDIP
-55 to +125
40 LD CERDIP
PKG. DWG. #
E40.6
E40.6
F40.6
CP80C88Z
(Note)
CP80C88Z
0 to +70
40 LD PDIP*
(Pb-Free)
E40.6
NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and 100%
matte tin plate PLUS ANNEAL - e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations.
Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J
STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Harris Corporation 1997, Copyright Intersil Americas Inc. 2004, 2008. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.