5962-0721201QXC Datasheet, PDF (1/10 Pages) Intersil Corporation – Video Distribution Amplifier

®
Data Sheet
5962-0721201QXC
November 1, 2007
FN6558.1
Video Distribution Amplifier
The 5962-0721201QXC is a fully DSCC SMD compliant
parts and the SMD data sheets is available on the DSCC
website (http://www.dscc.dla.mil/
programs/specfind/default.asp). The 5962-0721201QXC is
electrically equivalent to the EL8108. Reference equivalent
“EL8108” data sheet for additional information. The 5962-
0721201QXC is a dual current feedback operational
amplifier designed for video distribution solutions. This
device features a high drive capability of 450mA while
consuming 13mA of supply current per amplifier and
operating from a single 5V to 12V supply.
The 5962-0721201QXC is available in the industry standard
10 Ld Flatpack. The 5962-0721201QXC is ideal for driving
multiple video loads while maintaining linearity.
Ordering Information
PKG.
PART NUMBER PART MARKING PACKAGE DWG. #
5962-0721201QXC 07212 01QHC 10 Ld Flat Pack K10.A
150Ω
1
1
2
2
3
3
2
3
4
5
6
TABLE 1.
150Ω
DIFF GAIN
0
0.03
1
0.03
1
0.05
2
0.06
2
0.08
3
0.11
0
0.04
0
0.05
0
0.07
0
0.08
0
0.10
DIFF PHASE
0.01
0.01
0.02
0.03
0.03
0.03
0.01
0.02
0.02
0.03
0.03
Features
• Drives up to 450mA from a +12V supply
• 20V_P-P differential output drive into 100Ω
• -85dBc typical driver output distortion at full output at
150kHz
• -70dBc typical driver output distortion at 3.75MHz
• Low quiescent current of 13mA per amplifier
• 300MHz bandwidth
Applications
• Video distribution amplifiers
Pinout
5962-0721201QXC
(10 LD FLATPACK)
TOP VIEW
1
OUTA
2
INA-
3
INA+
4
GND
5
INB+
10
NC
9
NC
8
VS+
7
OUTB
6
INB-
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2007. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.