FMC-461 Datasheet, PDF (3/8 Pages) Interpoint Corporation Company – EMI INPUT FILTER 28 VOLT INPUT

EMI INPUT FILTERS
FMC EMI FILTER
2.7 AMP
Positive
Input
IN5649A
277 H
1
Input
Common
68
1
1 3300 pF / 500 V
35.6 H
6F
1F
6F
4.7
FMC-461
FMC-461/883
6800 pF / 500 V
(4 times)
The case ground connection between the filter and the converter should be as low an impedance as possible
to minimize EMI. Direct contact of baseplate to chassis ground provides the lowest impedance.
FIGURE 1: SCHEMATIC – TYPICAL VALUES
Positive
Output
Output
Common
Pin
Designation
1
Positive Input
2
Positive Output
3
Case Ground
4
Output Common
5
Input Common
PIN OUT
Dot on top of package indicates pin one
1
2
BOTTOM VIEW
3
FMC
NON-FLANGED AND FLANGED
5
4
Dotted line outlines flanged package option.
See Section B8, cases H1 and K2 for dimensions.
FIGURE 2: PIN OUT
DSCC NUMBER
DSCC DRAWING
(5915)
FMC-461 FILTER
SIMILAR PART
94010-01HXC
FMC-461/883
94010-01HZC
94010-02HXC¹
94010-02HZC¹
FMC-461F/883
FMC-461NT/883¹
FMC-461NTF/883¹
1. No transorb (NT)
Flanged SMDs have the suffix HZC instead of HXC.
For exact specifications for a DSCC product, refer to the
DSCC drawing. See Section A3, “SMD/DSCC Lists”, for
more information.
MODEL NUMBERING KEY
Base Model
FMC - 461 NT F / 883
MIL-STD-461 Reference
No Transorb Option
(Standard FMC-461 has no designator
in this position)
Case Option
(Non-flanged case has no designator in
this position)
Screening
(Standard screening has no designator
in this position.)
B3-15