SMHP120 Datasheet, PDF (2/8 Pages) Interpoint Corporation Company – DC/DC CONVERTERS 120 VOLT INPUT

CASE U
CASES
Angled corner indicates pin one
1.505 max (38.23)
CASE U
TOP VIEW
(PIN SIDE)
See Figures 55 and 56 for dimensions
3.005 (76.33) max.
Note: Pins are shown for Case U1.
Materials
Header Cold Rolled Steel/Nickel/Gold
Cover Kovar/Nickel
Pins #52 alloy/Gold
compression glass seal
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places
±0.01 (0.2) for two decimal places
unless otherwise specified
CAUTION
Heat from reflow or wave soldering may damage
the device. Solder pins individually with heat
application not exceeding 300°C for 10 seconds
per pin.
FIGURE 54: CASE U MAXIMUM DIMENSIONS
B8-36