SMHF282R5S Datasheet, PDF (11/15 Pages) Interpoint Corporation Company – Fully qualified to Class H or K -55°C to +125°C operation 16 to 40 VDC input

Crane Aerospace & Electronics Power Solutions
SMHF Single and Dual DC/DC Converter Cases
28 Volt input – 15 Watt
BOTTOM VIEW CASE E1
Projection Weld
1.130 max. (28.70)
0.960 (24.38)
0.030 dia.
(0.76)
Squared corner and dot on top
of case indicate pin one.
1
2345
8
0.160 (4.06)
0.000
7
6
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places
±0.01 (0.3) for two decimal places
unless otherwise specified
CAUTION
Heat from reflow or wave soldering may damage the device.
Solder pins individually with heat application not exceeding 300°C for 10 seconds per pin.
Materials
Header Cold Rolled Steel/Nickel/Gold
Cover Kovar/Nickel
Pins
#52 alloy/Gold compression glass seal
Case E1, Rev C, 20061221
Please refer to the numerical dimensions for accuracy. All information is believed to be accurate,
but no responsibility is assumed for errors or omissions. Interpoint reserves the right to make
changes in products or specifications without notice.
Copyright © 1999-2006 Interpoint Corp. All rights reserved.
Figure 21: Case E1
www.craneae.com
Page 11 of 15
Rev D - 20070404