IP1622 Datasheet, PDF (1/15 Pages) Interpion semiconductor – DUAL OUTPUT VOLTAGE LDO REGULATOR + RESET IC

IP1622
DUAL OUTPUT VOLTAGE LDO REGULATOR + RESET IC
DESCRIPTION
The IP1620 is an integrated circuit that has triple LDO
regulators and one reset circuit. All the LDO regulators
have their own internal npn power transistors and their
nominal output voltages are 1.65V and 3.4V, respectively.
The reset circuit monitors the status of the regulator input
voltage and outputs the RESET signal. RESET becomes
high after the delay time that is determined by the exter-
nal capacitor at Td pin. The delay time begins to start
after the input voltage reaches above 4.2V.
14SOPH-8L
FEATURES
- 1-Fixed 3.4V LDO regulator with internal NPN TR.
- 1-Fixed 1.65V LDO regulator with internal NPN TR.
- Typical reset detection voltage of 4.2V.
- Built-in TSD circuit.
- Built-in current limit circuit.
- Built-in over voltage protection circuit.
- Output trimmed to +/-3% tolerance.
BLOCK DIAGRAM
ORDERING INFORMATION
Device
IP1622
Package Operating Temp
14SOPH-8L -35^OC ~ +85^OC
April.2003 (Rev.1)
www.interpionsemi.com
-1-