DX58SO Datasheet, PDF (35/88 Pages) Intel Corporation – Technical Product Specification

Product Description
1.13.2.8 +5 V Standby Power Indicator LED and Additional LEDs
The +5 V standby power indicator LED shows that power is still present even when the
computer appears to be off. Figure 7 shows the location of the standby power
indicator LED on the board.
CAUTION
If AC power has been switched off and the standby power indicators are still lit,
disconnect the power cord before installing or removing any devices connected to the
board. Failure to do so could damage the board and any attached devices.
In addition to the standby power indicator, the board contains two LEDs that indicate
the following:
• The Processor LED indicates an elevated temperature on the processor that could
effect performance
• The Voltage Regulator LED indicates an elevated temperature in the processor
voltage regulator circuit that could effect performance
Figure 7 shows the location of these additional LEDs.
Item
A
B
C
D
Description
Voltage Regulator LED (Red)
Standby power indicator LED (Green)
Processor LED (Red)
Hard drive activity LED (Green)
Figure 7. Locations of Indicator LEDs
35