DG45FC Datasheet, PDF (33/88 Pages) Intel Corporation – Technical Product Specification

Product Description
1.12.1.2 Wake-up Devices and Events
Table 8 lists the devices or specific events that can wake the computer from specific
states.
Table 8. Wake-up Devices and Events
These devices/events can wake up the computer…
LAN
PME# signal
Power switch
RTC alarm
Serial port
USB
…from this state
S1, S3, S4, S5 ^{(Note 1)}
S1, S3, S4, S5 ^{(Note 1)}
S1, S3, S4, S5
S3, S4, S5
S3
S3
WAKE# signal
Consumer IR
S1, S3, S4, S5
S1, S3 (S4 and S5) ^{(Note 2)}
Notes:
1. For LAN and PME# signal, S5 is disabled by default in the BIOS Setup program. Setting this option to
Power On will enable a wake-up event from LAN in the S5 state.
2. Wake from S4 and S5 is optional by the specification.
NOTE
The use of these wake-up events from an ACPI state requires an operating system
that provides full ACPI support. In addition, software, drivers, and peripherals must
fully support ACPI wake events.
33