E10G42AFDA Datasheet, PDF (3/4 Pages) Intel Corporation – Intel® 10 Gigabit AF DA Dual Port Server Adapter

Specifications
General
Product code
Connectors
Cabling
E10G42AFDA
SFP+ connectors
• SFP+ direct attached cable
(twinaxial) only
• Other SFP+ optics are not allowed
and cannot be used with this adapter
Adapter Product Features
Intel® PROSet Utility
Intel® lead-free⁴ technology
Plug and play specification support
Intel® I/OAT² including QuickData
Ships with full-height bracket installed,
low-profile bracket added in package
RoHs³
Receive-side scaling
VMDq¹
Advanced packet filtering (per port)
Direct Cache Access (DCA)
• For easy configuration and
management
•
Standard
•
•
•
•
In a virtualized environment, packets
dedicated to different virtual machines
can be routed to different queues, thus
easing the routing of these packets to
the target machine
• 16 exact-matched packets
(unicast or multicast)
• 4096-bit hash filter for
multicast frames
• Promiscuous (unicast and multicast)
transfer mode support
• Optional filtering of invalid frames
The I/O device activates a pre-fetch
engine in the CPU that loads the data
into the CPU cache ahead of time,
before use, eliminating cache misses
and reducing CPU load
Network Management
DMI 2.0 support, Windows Management
•
Instrumentation (WMI) and SNMP
Remote Installation Services (RIS)
•
PXE 2.0 enabled through boot Read-Only
•
Memory (ROM)
Network Operating Systems (NOS) Software Support
Microsoft Windows* 2003 Server
IA32, X64
Microsoft Vista*
IA32, X64, IPF
Windows Virtual Server* 2005
IA32, X64, IPF
Red Hat Linux* 2.6x or later
IA32, X64, IPF
SUSE SLES 10* or later, Professional 9.2
or later
IA32, X64, IPF
FreeBSD* 5.x or later
IA32, X64, IPF
ESX 3.x* support (for VMware)
IA32, X64, IPF
Fedora*
IA32, X64, IPF
EFI 1.1*
IA32, X64, IPF
Intel Backing
Limited lifetime warranty
•
90-day, money-back guarantee
•
(U.S. and Canada)
Advanced Software Features
Adapter Fault Tolerance (AFT)
•
Switch Fault Tolerance (SFT)
•
Adaptive Load Balancing (ALB)
•
Teaming support
•
IEEE 802.3ae*⁵
•
Test switch configuration
Tested with major switch original
equipment manufacturers (OEMs)
PCIe Hot Plug*/Active Peripheral
•
Component Interconnect (PCI)
IEEE 802.1Q* VLANs
•
IEEE 802.3 2005* flow control support
•
Tx/Rx IP, TCP, & UDP checksum 0 offloading •
(IPv4, IPv6) capabilities control protocol (TCP),
user datagram protocol (UDP), Internet
protocol (IP)
IEEE 802.1p*
•
TCP segmentation/large send offload
•
MSI-X supports Multiple Independent Queues •
Interrupt moderation
•
IPv6 offloading
Checksum and segmentation capability
extended to new standard packet type
Technical Features
Data rate supported per port
Bus type
Bus width
Bus speed (x8, encoded rate)
Interrupt levels
Hardware certifications
Controller-processor
Typical power consumption
Airflow
Operating temperature
Storage temperature
Storage humidity
LED Indicators
10 Gigabit
PCI Express 2.0 (2.5 GT/s)
x8 lane PCI Express, operable in x4,⁶ x8
and x16 slots
20 Gbps uni-directional; 40 Gbps
bi-directional
INTA, INTB, INTC, INTD
FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
Intel® 82598EB
• 12.2 W maximum power, 10.1 W
typical power
• PCI Express +3.3 V power supply –
consumes 2.3 A max, 1.7 A typical
• PCI Express +12 V power supply –
consumes 0.4 A max, 0.4 A typical
150 LFM (Linear Feet per Minute)
0° C to 55° C (32° F to 131° F) with
100 LFM forced airflow (linear feet
per minute)
-40° C to 70° C (-40° F to 158° F)
90% non-condensing relative humidity
at 35° C
LINK (solid) and ACTIVITY (blinking)
Physical Dimensions
Length
Width
Height of end bracket
16.74 cm (6.59 in)
6.89 cm (2.71 in)
PCI Express standard, 12 cm (4.725 in)
PCI Express low-profile, 7.92 cm (3.12 in)