English
Language : 

915GME Datasheet, PDF (2/2 Pages) Intel Corporation – Mobile Intel® 915GME Express Chipset for Embedded Computing
Product Highlights (continued)
Display
• Analog display support
• PCI Express-based graphics interface
– P CI Express architecture support for external
graphics devices
– O ne 16-lane PCI Express port (x16 PCI Express port) intended
for graphics attach
• Dual display support
– Independent: different images and native display
timings on each display device
– S imultaneous: same images and native display
timings on each display device
• SDVO support
– D ual SDVO channels provide support for a wide
array of displays
• Dedicated Local Flat Panel (LFP) LVDS interface
Internal Graphics Features
• Core frequency
– Display core frequency up to 333 MHz
– Render core frequency up to 333 MHz
– D ynamic Video Memory Technology (DVMT) 3.0
to dynamically allocate up to 128 MB of system
memory for graphics usage
Mobile Intel® 915GME Express Chipset for Embedded Computing
Product
Product Code
Package
Intel® 915GME Graphics Memory
Controller Hub (GMCH)
QG82915GME
1257 µFC-BGA
Intel® I/O Controller Hub 6-M (ICH6-M)
FW82801FBM
NH82801FBM
609 µ-BGA
Features
• 400 and 533 MHz front-side bus
• Up to DDR2 533 MHz system memory
• Intel® Graphics Media Accelerator (GMA) 900
• PCI Express* external graphics support
• Direct connection to GMCH via Direct Media Interface
• Supports four PCI Express root ports
• Two-port Serial ATA controller
• Support for up to eight USB 2.0 ports
• Intel® High Definition Audio† interface
† Intel® High Definition Audio requires a system with an appropriate Intel® chipset and a motherboard with an appropriate codec and the necessary drivers installed.
System sound quality will vary depending on actual implementation, controller, codec, drivers and speakers. For more information about Intel® HD audio, refer to
www.intel.com
Intel Access
Embedded Intel® Architecture Home Page:
Developer’s Site:
Intel in Embedded and Communications:
General Information Hotline:
Intel® Literature Center:
intel.com/design/intarch
intel.com/design
intel.com/go/embedded
(800) 628-8686 or (916) 356-3104 5 a.m. to 5 p.m. PST
(800) 548-4725 7 a.m. to 7 p.m. CST (U.S. and Canada)
International locations please contact your local sales office.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY
RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL
DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR
PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
Intel products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Intel may make changes to specifications and product
descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future
definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize
a design with this information. The products described in this document may contain design defects or errors known as errata which may cause the product to
deviate from published specifications. Current characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the
latest specifications and before placing your product order. Copies of documents which have an order number and are referenced in this document, or other Intel
literature, may be obtained by calling 1-800-548-4725, or by visiting Intel’s Web Site www.intel.com/.
Intel, the Intel logo, Intel. Leap ahead., Intel. Leap ahead. logo, Pentium, and Celeron are trademarks of Intel Corporation in the U.S. and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2007 Intel Corporation. All rights reserved.
Printed in USA
0407/KSC/OCG/XX/PDF
Please Recycle
305887-002US