252479-007US Datasheet, PDF (1/128 Pages) Intel Corporation – Intel IXP42X Product Line of Network Processors and IXC1100 Control Plane Processor

Intel^® IXP42X Product Line of Network
Processors and IXC1100 Control Plane
Processor
Datasheet
Product Features
For a complete list of product features, see “Product Features” on page 10.
The following features do
not require enabling
software:
„ Intel XScale^® Processor — Up to 533
MHz
„ PCI Interface
„ USB v1.1 Device Controller
„ SDRAM Interface
„ High-Speed UART
„ Console UART
„ Internal Bus Performance Monitoring
Unit
„ 16 GPIOs
„ Four Internal Timers
„ Packaging
— 492-pin PBGA
„ Commercial/Extended Temperature
The following features do
require enabling software:
„ Encryption/Authentication
(AES,DES,3DES,SHA-1,MD5)
„ Two High-Speed, Serial Interfaces
„ Three Network Processor Engines
„ Up to two MII Interfaces
„ One UTOPIA Level 2 Interface
„ Multi-Channel HDLC
Note: Refer to the Intel^® IXP400 Software
Programmer’s Guide for information on
which features are currently enabled.
Typical Applications
„ High-Performance DSL Modem
„ High-Performance Cable Modem
„ Residential Gateway
„ SME Router
„ Network Printers
„ Control Plane
„ Integrated Access Device (IAD)
„ Set-Top Box
„ Access Points (802.11a/b/g)
„ Industrial Controllers
Document Number: 252479-007US
June 2007