IL700D Datasheet, PDF (2/4 Pages) Integral Corp. – HIGH VOLTAGE HIGH-FREQUENCY STEP-UP SWITCHING REGULATOR-CONTROLLER

IL235Z
Features
• Operate from a rectified 220 VAC line source.
• Oscillation frequency: 600 kHz.
• Output voltage external setting (FB) type available.
FB terminal voltage (V_FB) 1.0 V.
• Minimum of external components. The only peripheral
components that can be used with IC are a coil, a diode,
capacitors, and a resistor.
• Built-in converter of high voltage in low voltage, using 450 V
MOS-transistor and Zener diode.
• Built-in 700 V DMOS power switch.
• Duty ratio: 0% to 27% typ. PFM control
27% to 82% typ. PWM control
• Built-in current limiting circuit: Assigned by internal resistor (RSENSE).
• Soft-start function: Can be set with an external capacitor (C_SS).
Block diagram
Vdd
Vdd_HV
TR2
R1
R2
Vz
ZD1
Phase
compensation
circuit
Triangular wave
oscillation circuit
Soft-start
circuit
PWM/PFM switching
control circuit
Voltage/current
reference
Rs
Cs
120mV
VREF=1.0V
DRAIN
TR1
SENSE
RSENSE
SOURCE
FB
СSS
СVREF
Vss
* - Pin number are defined during designing
Korzhenevskogo 12, Minsk, 220108, Republic of
Belarus
Fax: [phone],
Phone: [phone],
2
212 69 16
E-mail: [e-mail]
URL: www.bms.by