IN74ACT574 Datasheet, PDF (1/5 Pages) Integral Corp. – OCTAL 3-STATE NONINVERTING D FLIP-FLOP

IN74ACT574
OCTAL 3-STATE
NONINVERTING D FLIP-FLOP
High-Performance Silicon-Gate CMOS
The IN74ACT574 is identical in pinout to the LS/ALS574,
HC/HCT574. The IN74ACT574 may be used as a level converter
for interfacing TTL or NMOS outputs to High Speed CMOS inputs.
Data meeting the setup time is clocked to the outputs with the
rising edge of the Clock. The Output Enable input does not affect
the states of the flip-flops, but when Output Enable is high, all
device outputs are forced to the high-impedance state; thus, data
may be stored even when the outputs are not enabled.
• TTL/NMOS Compatible Input Levels
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 4.5 to 5.5 V
• Low Input Current: 1.0 µA; 0.1 µA @ 25°C
• Outputs Source/Sink 24 mA
ORDERING INFORMATION
IN74ACT574N Plastic
IN74ACT574DW SOIC
T_A = -40° to 85° C for all
packages
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 20=V_CC
PIN 10 = GND
FUNCTION TABLE
Inputs
Output
Output Clock
D
Q
Enable
L
H
H
L
L
L
L L,H,
X
no
change
H
X
X
Z
X
=
don’t
care
Z = high impedance
1