IN74ACT374 Datasheet, PDF (1/5 Pages) Integral Corp. – OCTAL 3-STATE NONINVERTING D FLIP-FLOP High-Speed Silicon-Gate CMOS

IN74ACT374
OCTAL 3-STATE
NONINVERTING D FLIP-FLOP
High-Speed Silicon-Gate CMOS
The IN74ACT374 is identical in pinout to the LS/ALS374,
HC/HCT374. The IN74ACT374 may be used as a level converter
for interfacing TTL or NMOS outputs to High Speed CMOS inputs.
Data meeting the setup and hold time is clocked to the outputs
with the rising edge of the Clock. The Output Enable input does
not affect the states of the flip-flops, but when Output Enable is
high, the outputs are forced to the high-impedance state; thus,
data may be stored even when the outputs are not enabled.
• TTL/NMOS Compatible Input Levels
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 4.5 to 5.5 V
• Low Input Current: 1.0 µA; 0.1 µA @ 25°C
• Outputs Source/Sink 24 mA
ORDERING INFORMATION
IN74ACT374N Plastic
IN74ACT374DW SOIC
T_A = -40° to 85° C for all
packages
PIN ASSIGNMENT
LOGIC DIAGRAM
PIN 20=V_CC
PIN 10 = GND
FUNCTION TABLE
Inputs
Output
Output Clock
D
Q
Enable
L
H
H
L
L
L
L L,H,
X
no
change
H
X
X
Z
X = don’t care
Z = high impedance
1