|
IN74ACT245 Datasheet, PDF (1/5 Pages) Integral Corp. – OCTAL 3-STATE NONINVERTING BUFFER/LINE DRIVER/LINE RECEIVER | |||
|
IN74ACT245
OCTAL 3-STATE NONINVERTING
BUS TRANSCEIVER
High-Speed Silicon-Gate CMOS
The IN74ACT245 is identical in pinout to the LS/ALS245,
HC/HCT245. The IN74ACT245 may be used as a level converter
for interfacing TTL or NMOS outputs to High Speed CMOS
inputs.
The IN74ACT245 is a 3-state noninverting transceiver that is
used for 2-way asynchronous communication between data
buses. The device has an active-low Output Enable pin, which is
used to place the I/O ports into high-impedance states. The
Direction control determines whether data flows from A to B or
from B to A.
⢠TTL/NMOS Compatible Input Levels
⢠Outputs Directly Interface to CMOS, NMOS, and TTL
⢠Operating Voltage Range: 4.5 to 5.5 V
⢠Low Input Current: 1.0 µA; 0.1 µA @ 25°C
⢠Outputs Source/Sink 24 mA
ORDERING INFORMATION
IN74ACT245N Plastic
IN74ACT245DW SOIC
TA = -40° to 85° C for all
packages
PIN ASSIGNMENT
LOGIC DIAGRAM
PIN 20=VCC
PIN 10 = GND
FUNCTION TABLE
Control Inputs
Output Direction
Operation
Enable
L
L
Data Transmitted
from Bus B to Bus A
L
H
Data Transmitted
from Bus A to Bus B
H
X
Buses Isolated (High
Impedance State)
X = donât care
1
|
▷ |