IN74ACT241 Datasheet, PDF (1/4 Pages) Integral Corp. – OCTAL 3-STATE NONINVERTING BUFFER/LINE DRIVER /LINE RECEIVER

IN74ACT241
OCTAL 3-STATE NONINVERTING BUFFER/LINE
DRIVER/LINE RECEIVER
High-Speed Silicon-Gate CMOS
The IN74ACT241 is identical in pinout to the LS/ALS241,
HC/HCT241. The IN74ACT241 may be used as a level converter
for interfacing TTL or NMOS outputs to High Speed CMOS inputs.
This octal noninverting buffer/line driver/line receiver is
designed to be used with 3-state memory address drivers, clock
drivers, and other bus-oriented systems. The device has
noninverting outputs and two output enables. Enable A is active-
low and Enable B is active-high.
• TTL/NMOS Compatible Input Levels
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 4.5 to 5.5 V
• Low Input Current: 1.0 µA; 0.1 µA @ 25°C
• Outputs Source/Sink 24 mA
ORDERING INFORMATION
IN74ACT241N Plastic
IN74ACT241DW SOIC
T_A = -40° to 85° C for all
packages
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 20=V_CC
PIN 10 = GND
FUNCTION TABLE
Inputs Output Inputs
Enable A YA Enable B
A
B
L
L
L
H
L
L HH
HH
HXZ
L
X
X = don’t care
Z = high impedance
Outpu
t
YB
L
H
Z
1