IN74ACT157 Datasheet, PDF (1/5 Pages) Integral Corp. – Quad 2-Input Data Selector/Multiplexer

TECHNICAL DATA
Quad 2-Input Data Selector/Multiplexer
High-Speed Silicon-Gate CMOS
IN74ACT157
The IN74ACT157 is identical in pinout to the LS/ALS157,
HC/HCT157. The IN74ACT157 may be used as a level converter for
interfacing TTL or NMOS outputs to High Speed CMOS inputs.
This device routes 2 nibbles (A or B) to a single port (Y) as
determined by the Select input. The data is presented at the outputs in
noninvertered form. A high level on the Output Enable input sets all
four Y outputs to a low level.
• TTL/NMOS Compatible Input Levels
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 4.5 to 5.5 V
• Low Input Current: 1.0 µA; 0.1 µA @ 25°C
• Outputs Source/Sink 24 mA
ORDERING INFORMATION
IN74ACT157N Plastic
IN74ACT157D SOIC
T_A = -40° to 85° C for all
packages
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 16 =V_CC
PIN 8 = GND
198
FUNCTION TABLE
Inputs
Outputs
Output
Enable
Select Y0-Y3
H
X
L
L
L
A0-A3
L
H
B0-B3
X=don’t care
A0-A3,B0-B3=the levels of the respective
Data-Word Inputs