IN74AC244 Datasheet, PDF (1/4 Pages) Integral Corp. – Octal 3-State Noninverting Buffer/Line Driver/Line Receiver High-Speed Silicon-Gate CMOS

TECHNICAL DATA
Octal 3-State Noninverting
Buffer/Line Driver/Line Receiver
High-Speed Silicon-Gate CMOS
IN74AC244
The IN74AC244 is identical in pinout to the LS/ALS244,
HC/HCT244. The device inputs are compatible with standard CMOS
outputs; with pullup resistors, they are compatible with LS/ALS
outputs.
This octal noninverting buffer/line driver/line receiver is designed
to be used with 3-state memory address drivers, clock drivers, and
other bus-oriented systems. The device has noninverting outputs and
two active-low output enables.
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 2.0 to 6.0 V
• Low Input Current: 1.0 µA; 0.1 µA @ 25°C
• High Noise Immunity Characteristic of CMOS Devices
• Outputs Source/Sink 24 mA
LOGIC DIAGRAM
ORDERING INFORMATION
IN74AC244N Plastic
IN74AC244DW SOIC
T_A = -40° to 85° C for all
packages
PIN ASSIGNMENT
PIN 20=V_CC
PIN 10 = GND
318
FUNCTION TABLE
Inputs
Enable A,
A,B
Enable B
L
L
L
H
H
X
X=don’t care
Z = high impedance
Outputs
YA,YB
L
H
Z