IL78L Datasheet, PDF (1/5 Pages) Integral Corp. – THREE-TERMINAL LOW CURRENT POSITIVE VOLTAGE REGULATORS

IL78LXX
THREE-TERMINAL LOW CURRENT POSITIVE VOLTAGE REGULATORS
The IL78LXX, A Series of positive voltage regulators are
inexpensive, easy-to-use devices suitable for a multitude of
applications that require a regulated supply of up to 100 mA. These
regulators feature internal current limiting and thermal shutdown
making them remarkably rugged. No external components are
required with the IL78LXX devices in many applications.
These devices offer a substantial performance advantage over the
traditional zener diode-resistor combination, as output impedance and
quiescent current are substantially reduced.
TO-226AA /
TO-92
Pin 1. Output
2.Ground
3.Input
FEATURES
• Wide Range of Available, Fixed Output Voltages
• Low Cost
• Internal Short Circuit Current Limiting
• Internal Thermal Overload Protection
• No External Components Required
• Complementary Negative Regulators Offered
(IL79LXX Series)
• Available in either ±5% (AC) or ±10% (C)
Selections
Vin
Ñ_in*
0.33µF
Standard application
I L 78L XX
Vout
Ñ_o* ^*
0.1µF
ABSOLUTE MAXIMUM RATINGS
Rating
Input Voltage (2.6 V-8.0 V)
(12V-18V)
(24V)
Storage Temperature Range
Operating Junction Temperature Range
A common ground is required between the input
and the output voltages. The input voltage must
remaintypically 2.0 V above the output voltage even
during the low point on the input ripple voltage.
*C in is required if regulator is located an
*appreciable distance from power supply filter.
**C O is not needed for stability; however, it does
*improve transient response.
Symbol
V_l
Tstg
TJ
Value
Unit
30
Vdc
35
40
-65 to +150
°C
010+150
°C
1