IL6840 Datasheet, PDF (1/5 Pages) Integral Corp. – Telephone Tone Ringer with Bridge Diode

TECHNICAL DATA
Telephone Tone Ringer with
Bridge Diode
IL6840
The IL6840 is a monolithic integrated circuit telephone tone ringer with
bridge diode, when coupled with an appropriate transducer, it replaces
the electro-mechanical bell. The device is designed for use with either a
piezo transducer or an inexpensive transformer coupled speaker to
produce a pleasing tone composed of a high frequency (f_R) alternating
with a low frequency (f_L) resulting in a warble frequency. The supply
voltage is obtained from the AC ring signal and the circuit is designed so
that noise on the line or variation of the ringing signal can not affect
correct operation of the device.
• On chip high voltage full wave diode bridge rectifier
• Low current consumption, in order to allow the parallel operation of
the 4 devices
• Low external component count
• Tone and switching frequencies adjustable by external components
• High noise immunity due to built-in voltage-current hysteresis
• Activation voltage adjustable
• Internal zener diodes to protect against over voltages
• Ringer impedance adjustable with external components
ORDERING INFORMATION
IL6840N Plastic DIP
IL6840D
SOIC
T_A = -40° to 70° C
for package
PIN ASSIGNMENT
OUT
BLOCK DIAGRAM
1