English
Language : 

IA188ES Datasheet, PDF (1/2 Pages) InnovASIC, Inc – 16-BIT MICROCONTROLLERS
IA186ES/IA188ES
16-BIT MICROCONTROLLERS
Advance Information Sheet
innovASIC
FEATURES
•
Pin-for-Pin compatible with AMD® Am186ES/188ES devices
•
All features are retained, including:
• PLL allowing same crystal/system clock frequency
• 8086/8088 instruction set with additional 186 instruction set extensions
• Programmable interrupt controller
• Two DMA channels
• Three 16-bit timers
• Programmable chip select logic and wait-state generator
• Dedicated watch dog timer
• Two independent asynchronous serial ports (UARTs)
o DMA capability
o Hardware flow control
o 7, 8, or 9-bit data capability
• Pulse Width Demodulator feature
• Up to 32 programmable I/O pins (PIO)
•
Pseudo-static/dynamic RAM controller
•
Fully static CMOS design
•
40 MHz operation at industrial operating conditions
•
+5 VDC power supply
•
Available packages:
o 100-pin Thin Quad Flat Pack (TQFP)
o 100-pin Plastic Quad Flat Pack (PQFP)
The IA186ES/188ES is a form, fit, and function replacement for the original Advanced Micro
Devices® Am186ES/188ES family of microcontrollers. innovASIC produces replacement ICs
using its MILESTM, or Managed IC Lifetime Extension System, cloning technology. This
technology produces replacement ICs far more complex than "emulation" while ensuring they are
compatible with the original IC. MILESTM captures the design of a clone so it can be produced
even as silicon technology advances. MILESTM also verifies the clone against the original IC so
that even the "undocumented features" are duplicated.
This Advance Information Sheet contains preliminary information for the IA186ES/188ES. The
complete data sheet which documents all necessary engineering information about the
IA186ES/188ES including functional and I/O descriptions, electrical characteristics, and
applicable timing will be available when the device nears completion.
Copyright © 2002
innovASIC
The End of Obsolescence™
Page 1 of 2
www.innovasic.com
Customer Support:
1-888-824-4184