English
Language : 

V23848-N15-C56 Datasheet, PDF (9/29 Pages) Infineon Technologies AG – iSFP-Intelligent Small Form-factor Pluggable SONET OC-48 SR-1 / SDH STM I-16 Multirate Applications up to 2.67 Gbit/s
V23848-N15-C56
V23848-N15-C456
Technical Data
Electrical Characteristics (VCC = 2.97 V to 3.63 V, TC = –40°C to 85°C)
Parameter
Symbol
Values
Unit
min.
typ.
max.
Common
Supply Voltage
In-rush Current1)
Power Dissipation
VCC–VEE 2.97
3.3
IIR max
P
3.63
V
30
mA
1.1
W
Transmitter
Differential Data Input Voltage VIDpk-pk 500
Swing2)
3200
mV
Tx Disable Voltage
Tx Enable Voltage
Tx Fault High Voltage
Tx Fault Low Voltage
Supply Current3)
Receiver
TxDis
2
TxEn
VEE
TxFH
2.4
TxFL
VEE
ITx
VCC
V
0.8
V
VCC
V
0.5
V
150
mA
Differential Data Output Voltage VODpk-pk 500
600
1000
mV
Swing 4)
LOS Active
LOSA
2.4
VCC
V
LOS Normal
LOSN
VEE
0.5
V
Receiver Added Jitter
JRx
52
ps
Rise Time5)
tR-Rx
190
ps
Fall Time5)
tF-Rx
190
ps
Power Supply Noise Rejection6) PSNR
100
mVpp
Supply Current3) 7)
IRx
150
mA
1) Measured with MSA recommended supply filter network (Figure 7). Maximum value above that of the steady
state value.
2) Internally AC coupled. Typical 100 Ω differential input impedance.
3) MSA defines maximum current at 300 mA.
4) Internally AC coupled. Load 50 Ω to GND or 100 Ω differential. For dynamic measurement a tolerance of
50 mV should be added.
5) Measured values are 20% - 80%.
6) Measured using a 20 Hz to 1 MHz sinusoidal modulation with the MSA recommended power supply filter
network (Figure 7) in place. A change in sensitivity of less than 1 dB can be typically expected.
7) Supply current excluding Rx output load.
Preliminary Product Information
9
2004-06-22