TLE4906K Datasheet, PDF (9/17 Pages) Infineon Technologies AG – High Precision Hall Effect Switch

3
Specification
TLE4906K
TLE4906L
Specification
3.1
Absolute Maximum Ratings
Table 3 Absolute Maximum Rating Parameters
T_j = -40°C to 150°C
Parameter
Symbol
Limit Values Unit
Min.
Max.
Supply voltage
V_S
-18
18
V
-18
24
-18
26
Supply current through
I_S
protection device
-50
50
mA
Output voltage
V_Q
-0.7
18
V
-0.7
26
Continuous output current I_Q
Junction temperature
T_j
-50
50
mA
–
155
°C
–
165
–
175
–
195
Storage temperature
T_S
Magnetic flux density
B
-40
150
°C
–
unlimited mT
Note / Test Condition
for 1h, R_S ≥ 200Ω
for 5min, R_S ≥ 200Ω
for 5min @ 1.2kΩ pull up
for 2000h (not additive)
for 1000h (not additive)
for 168h (not additive)
for 3 x 1h (additive)
Note: Stresses above the max. values listed here may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are
absolute ratings; exceeding only one of these values may cause irreversible damage to the integrated circuit.
Table 4 ESD Protection¹⁾
Parameter
Symbol
Limit Values Unit Note / Test Condition
Min.
Max.
ESD Voltage
V_ESD
±6
kV
HBM, R = 1.5kΩ,
C = 100pF
T_A = 25°C
1) Human Body Model (HBM) tests according to: EOS/ESD Association Standard S5.1-1993 and Mil. Std. 883D method
3015.7
Data Sheet
7
V 2.0, 2009-01