TLD1124EL Datasheet, PDF (8/29 Pages) Infineon Technologies AG – 1 Channel High Side Current Source Basic LED Driver

TLD1124EL
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
T_j = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin for input pins (I), positive
currents flowing out of the I/O and output pins (O) (unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values Unit Conditions
Min.
Max.
Voltages
4.1.1 Supply voltage
V_S
-16
40
V–
4.1.2 Diagnosis enable voltage DEN
V_DEN
-16
40
V–
4.1.3
Diagn. enable voltage DEN related to V_S V_DEN(VS) V_S - 40 V_S + 16 V
–
4.1.4
Diagn. enable voltage DEN related to V_DEN - -16
40
V_OUT
V_OUT
V_DEN - V_OUT
V–
4.1.5 Output voltage
V_OUT
-1
40
V–
4.1.6
Power stage voltage
V_PS = V_S - V_OUT
V_PS
-16
40
V–
4.1.7 IN_SET voltage
V_{IN_SET} -0.3
6
V–
4.1.8 Status voltage
V_ST
-0.3
6
V–
Currents
4.1.9 IN_SET current
I_{IN_SET}
–
2
mA –
–
8
Diagnosis output
4.1.10 Output current
Temperatures
I_OUT
–
390
mA –
4.1.11 Junction temperature
4.1.12 Storage temperature
ESD Susceptibility
T_j
-40
150
°C –
T_stg
-55
150
°C –
4.1.13 ESD resistivity to GND
V_ESD
-2
2
kV
4.1.14 ESD resistivity all pins to GND
V_ESD
-500
500
V
4.1.15 ESD resistivity corner pins to GND
V_ESD
-750
750
V
1) Not subject to production test, specified by design
2) ESD susceptibility, Human Body Model “HBM” according to ANSI/ESDA/JEDEC JS-001-2011
3) ESD susceptibility, Charged Device Model “CDM” according to JESD22-C101E
Human Body
Model (100 pF via
1.5 kΩ)²⁾
CDM³⁾
CDM³⁾
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
8
Rev. 1.0, 2013-08-08