V23833-FX105-B001 Datasheet, PDF (7/25 Pages) Infineon Technologies AG – XFP1310 nm Small Form Factor Module 10 Gigabit Pluggable Transceiver Compatible with XFP MSA Rev. 3.1

V23833-Fx105-B001
V23833-Fx105-B002
Description
Environment: Thermal Management Recommendations
Operating air inlet temperature:
0°C - 50°C
Operating Airflow:
200 LFM (1.5 m/s)
Operating Humidity:
85% RH non-condensing
Maximum operating case temperature is 70°C as defined by UL 1950.
Module can withstand and operate within specification with case temperature of 75°C for
up to 96 hrs/yr. Transceiver requires airflow parallel to cooling fins. Maximum airflow
required per XFP MSA is 3 m/s.
Fibers and Connectors
The transceiver LC features a duplex receptacle and is designed for single mode LC
cables, 0° polished end face (PC).
30-pin Connector
The module interface connector is a 30-pin, printed circuit board edge connection with a
0.8 mm pitch. The appropriate mating connector for the customer PCB is a 30-pin SMT,
dual row, right angled, edge connector, 0.8 mm pitch (TycoAmp part number 788862C
or equivalent).
Cage/Heatsink Requirement
The cage/heatsink assembly required to mount the XFP module is defined by the MSA.
Preliminary Product Information
7
2004-06-04